Sony TA-F461R Service Manual

TA-F4GIR
SERVICE MANUAL AEP Model
SPECIFICATIONS
Amplifier
Power output (both channels driven simultaneously) Tone controls
P_[Response | umower frequen
7 apo) [soos
TREBLE +7 dB (10 kHz) 3kHz
Harmonic distortion Less than 0.025 % at 10 W output
Intermodulation (IM) distortion (60 Hz : 7 kHz = 4:1)
Less than 0.025 % at 10 W output
Frequency response PHONO: RIAA equalization curve
+0.5 dB
TUNER, CD, AUX, TAPE 1/DAT,
TAPE 2/MD: 7 Hz - 100 kHz 'dB
70 W +70W
1kHz
8 ohms | 55W+55W
45 W +45 W
50 kilohms
20 Hz-
20 kHz
Input
Input jack
TUNER, CD, AUX, | Phono
TAPE 1/DAT,
20 kilohms
PHONO A, General
SmV System Preamplifier: Low-noise, equalizer
RCD,
amplifier
Power amplifier: Pure-complementary
SEPP OCL power amplifier with all
stages directly coupled
AUX,
TAPE 1/DAT,
TAPE 2/MD
Power requirements 220 V — 230 V AC, 50/60 Hz
Output Power consumption 170 W
Dimensions Approx. 430 x 135 x 315 mm (w/h/d)
REC OUT Phono jack —_| Voltage 150 mV erg Se ete)
Impedance 1 kilohm Mass Approx. 5.6 kg (12 tb 6 oz)
fo 4-16 ohms Supplied accessories Remote commander RM-S312 (1)
SPEAKERS
PHONES
SPEAKERS A + B: 8-16 ohms Sony SUM-3 (NS) batteries (2)
Stereo phone | 10 mW (at 8 ohms)
jack Accepts low and high
impedance headphones
The above values are measured at 230 V AC.
Design and specifications are subject to change without notice.
INTEGRATED STEREO AMPLIFIER
SONY.