Advertisement

New Gen Mini Workstation Series
New Gen Mini Workstation Series
Copyright @ 2024 Micro Computer (HK) Tech Limited.
Copyright @ 2024 Micro Computer (HK) Tech Limited.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the New Gen Mini and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for MINISFORUM New Gen Mini

  • Page 1 New Gen Mini Workstation Series New Gen Mini Workstation Series Copyright @ 2024 Micro Computer (HK) Tech Limited. Copyright @ 2024 Micro Computer (HK) Tech Limited.
  • Page 2: Safety Instructions

    This product supports Phoenix and Raphael/Granite Ridge CPUs, different CPUs with different architectures require different Type-C controller firmware, otherwise the Type-C interface will not work properly, for details, please refer to (www.minisforum.com/new/support) for Type-C controller firmware. Note! This interface supports different protocols depending on the CPU used.
  • Page 3: Conventions Used In This Manual

    Conventions Used In This Manual Note:--- This message contains additional instructions for this item. Important!--- This information contains instructions that must be followed. Warning!--- This message contains information about user safety and product safety. Package Contents HDMI Cable / Ac Power Adapter */ Power Cord */ Copyright @ 2022 Micro Computer (HK) Tech Limited.
  • Page 4 Getting To Know Your Mini PC Reset Hole Power Button 3.5mm Combo Jack USB2.0 Port USB3.2 Port Air Vent Power Input OCulink Port RJ-45 LAN Port USB2.0 Port DisplayPort USB3.2 Gen2 Port Type-C Port HDMI® Port Interface Power Button The power button allows you to turn the Mini PC on /off. You can press the power button to put your Mini PC to sleep mode or press it for 10 seconds to force shutdown your Mini PC.
  • Page 5: Rj-45 Lan Port

    RJ-45 LAN Port This RJ-45 network interface supports standard Ethernet cables and can be connected to a local area network. (Transmission speed 2.5Gbps) DisplayPort This DisplayPort supports display output. It can transmit digital audio information while trans- mitting video signals. HDMI®...
  • Page 6 Getting Started With Your Mini PC Connect the display to the Mini PC‘s HDMI® port、DP port or Type-C port. Connect the keyboard and mouse. Connect the provided power adapter to your Mini PC. Turn on the power and start the Mini PC. If the Mini PC is frozen or slow to respond, To put your Mini PC on Sleep mode, press the press and hold the power button at least for...
  • Page 7 Installation Guide Remove the two screws from the bottom cover using the tool, then use the included tool to pull out the motherboard slot at the position shown in the diagram. Warning: Only use the clip at the position shown in the diagram. DIY CPU First remove the screws from the back of the motherboard's CPU cooling assembly, then remove the screws from the front of the motherboard's cooling module and remove the...
  • Page 8 Reinstall the cooling module onto the motherboard, securing the screws of the cooling module on the front of the motherboard to the screws of the CPU cooling assembly on the back. DIY SSD Use the tool to remove the SSD cooling module, the SSD on the CPU side needs to be unscrewed first with the hexagonal studs.
  • Page 9 Raphael architecture PCIE4.0x1 PCIE4.0x4 PCIE4.0x4 PCIE3.0x4 Granite Ridge architecture PCIE4.0x1 PCIE4.0x4 PCIE4.0x4 PCIE3.0x4 Phoenix architecture PCIE4.0x1 PCIE4.0x4 PCIE4.0x4 PCIE3.0x4 Phoenix2 architecture PCIE4.0x4 Not Suppoted PCIE4.0x1 PCIE4.0x2 Note: The speed and availability of the SSD on this motherboard may vary when inserting different CPUs.
  • Page 10 Use the tool to reassemble the SSD cooling module. After inserting the motherboard bracket back into the case, lock the motherboard bracket locking screws.
  • Page 11 *DIY NO CPU *Versions without CPU ship with individually packaged CPU/memory SSD cooler accessories. SSD cooling module */ CPU cooling assembly */ Mounting Screw Set */ M2 screws M2.5 screws First, use the M2 studs to lock the SSD, and then use the M2 screws to lock the SSD heat sink. After unscrewing the M3 screws on the motherboard, use the M3 screws to lock the CPU cooler.
  • Page 12 生产商: 深圳市美高电子设备有限公司 网址: https://www.miniscloud.com 地址: 深圳市龙岗区平湖街道禾花社区富康路6号深业物流平湖 中心厂房B(宝能智创谷B栋)201、206-208、217-222 电话: 0755-84659450 售后技术支持 网址: https://www.minisforum.com/new/support 电话: 400-090-9901 Contact information Manufacturer: Micro Computer (HK) Tech Limited Website: https://www.miniscloud.com Address: FLAT/RM 18, 28/F, Shui On Centre, 6-8 Harbour Road, Waterfront Wan Chai , Hong Kong TEL:...

Table of Contents