Hive GU10 User Manual

Welcome to Hive
This guide tells you everything you need to know to use your Hive Light.
Your Hive Light can be turned on and off and dimmed remotely from
your smartphone or tablet. You can also set schedules for when it turns
on and off.
If you're new to Hive products, please see the user guide provided with your Hive Hub to set up your Hive account.
Hive Light
Dimmable smart GU10 bulb.
Getting started:
1 Add your Hive Light
You can do this using your Hive app.
Using the Hive app:
• Open the Hive app on your smartphone or
tablet. You may be asked to log in.
• Tap on Manage > Install a device > Install
Hive devices > Other Hive Devices > Start.
2 Fit the bulb into the light fitting
and switch the light on
Ensure the wall switch for the light is switched off
before fitting the bulb. Your Hive Light is fitted
in the same way traditional household bulbs are.
Once fitted, switch the light on at the wall and
the bulb will then flash on and off to show that
it is searching for your Hub.
Once your Hive Light appears on the screen, it
will flash once more to confirm it's connected.
You can now name it and press Save to
complete setup.
3 That's it!
You've finished setting up your Hive Light and
you can now control it remotely.
User Guide
Remember: To turn your Hive Light on or off
remotely, it must be switched on at the wall.
Your Hive Light should not be dimmed using
a wall mounted dimmer switch as it may cause
buzzing or flickering.
Use in dry location only.