Sound Leisure BLUETOOTH-002 User Manual

Bluetooth User Guide for a Series 2 Jukebox
Pair Instructions
To pair an audio device to the Bluetooth accessory:
1. Ensure the LED on the front of the Bluetooth accessory is solid red.
If the LED is not solid red, press the button on the front of the accessory to
enter pairing mode.
2. Turn on the Bluetooth connection on your audio device and begin searching
for devices (refer to your audio device manual for instruction on how to do
this).
3. From the list of found devices, select 'SoundLeisureJB'.
If your audio device asks for a confirmation, press ok
If your audio device asks for a password, enter '1234'.
4. Once pairing is complete, the LED on the front of the Bluetooth accessory will
begin to flash green.
5. The LED will change to solid green, when audio is being played on your
device.
To pair to a new device:
Press the button on the front of the Bluetooth accessory to unpair your connected
device or unpair using your audio device
instruction on how to do this).
The LED on the front of the
unpaired.
To connect to a new device repeat the pairing procedure above.
Please set your audio streaming device's volume to three quarters or above.
Jukebox Auxiliary Switching
The jukebox will switch to the Bluetooth accessory automatically when a CD is not
being played. By default it will take 10 seconds before the Bluetooth audio is heard.
QMS Document Bluetooth User Guide for a Series 2 Jukebox Page 1 of 3
Version: 1
(refer to your audio device manual for
Bluetooth accessory will change to solid red when
audio
02/05/2014