Color management for on board connecter
•
Header Naming should follow MB Header Naming
•
System BIOS
Kernel: AMI Aptio Kernel with Acer skin/copyright.
•
Type:
•
Use SPI Flash
•
Size: 64M
•
Power supply
300W/ 500W in stable mode (Acer/GTW Assign System Power Unit).
•
Design for Intel Piketon chipset compatible system.
•
Voltage design should be covered +5V, +3.3V, +12V, +5VSB, -12V (attention to 12V output capability).
•
Demand for both PFC/Non-PFC solutions (two different quotations are needed).
•
Minimum 4 Serial ATA power connector solution should be included (by default).
•
Minimum 1 big 4-pin power connector included.
•
Minimum 1 small 4-pin power connector included.
•
PFC version will not provide switch selector for 115/230V AC input but it should be universal for Europe
•
and China.
Non-PFC version should provide switch selector for 115/230V AC input and universal for worldwide.
•
PS2 style.
•
Compliant with EnergyStar 5.0.
•
EuP lot6 requirements.
•
Chapter 1
5