Page 2
Dear Customer, Please read this user manual before using the product. Thank you for choosing this product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents before using the product.
MANUFACTURER GUARANTEE TERMS AND Placing the dishes into the dishwasher ... 21 CONDITIONS ..........44 Cutlery basket ..........23 ZENITH UK AND NORTHERN IRELAND BUILT- Cutlery basket ..........23 IN APPLIANCES GUARANTEE TERMS AND Collapsible lower basket tines ......24 CONDITIONS ..........
This product must be used to Safety Instructions do the domestic type dishes • This section contains safety only. instructions that will help get This product is not suitable for protected against risks of commercial or collective use. personal injury or property damage.
door should not be left in the excessively, pinched or come open position since this could into contact with any heat present a tripping hazard. sources. Cleaning and user Do not use extension cords, maintenance works should multi-sockets or adapters to not be performed by children operate the product.
NOTICE Make sure that cause hot steam to escape. the hoses do not get kinked, Otherwise, it might cause squeezed or crushed while serious burns and injuries, placing the product into its and harm your furniture. location after installation or Do not install the product cleaning procedures.
NOTICE You must use the When you pull the upper and new hose set provided with the lower baskets out completely, product. Do not reuse the old the door of the product will hose set. Do not make extension bear all the weight of the at the hoses.
Do not climb on the product. • Unplug the product and close the tap if you are not going to use it for a long time. Maintenance and cleaning safety Do not wash the product by spreading or pouring water onto it.
Compliance with RoHS Environmental Directive Instructions The product you have purchased complies with EU RoHS Directive Compliance with WEEE (2011/65/EU). It does not contain Directive and Disposing of harmful and prohibited materials the Waste Product specified in the Directive. This product complies with EU WEEE Directive (2012/19/ Package information EU).
Page 10
Note for test institutions: Frequency Band : 2.400-2.484 Ghz Data required for performance tests shall Max. Transmission Power : < 100mW be provided upon request. Requests can Conformity declaration for be e-mailed to the following address: UKCA dishwasher@standardloading.com Do not forget to provide the code, stock number and serial number of the product ARÇELİK hereby declares that this to be tested in your request e-mail along...
Technical specifications Maximum washing capacity (check the energy label and Programme data and average consumption values table given on Quick Guide. ) Height (check installation document for installation) Width: 60 Depth: 57 Power input: 220-240 V, 50 Hz * Total power: 1800-2100 W * Heater power: 1800 W * Total current: 10 A * Pump power: 90 - 125 W *...
Installation Appropriate installation location In the area where this product is Read “Safety Instructions” section first! installed, there must not be a lockable, Installation procedures must always be sliding or hinged door that will restrict performed by the manufacturer, authorised full opening of the product’s door.
Aquasafe+Aquasafe Permitted water temperature: up to 25°C ( 60°C for products equipped (depends on the model) with Aquasafe+Aquasafe; please The Aquasafe+Aquasafe system protects refer to Aquasafe+Aquasafe section against water leaks that may occur at the hose inlet.Water contact with the valve box The dishwasher may not be connected to of the system must be avoided to prevent open warm water devices or flow-through...
Connection to the drain Electrical connection Water discharge hose can directly be Connect the product to a grounded connected to the drain hole or sink’s outlet protected by a fuse complying drainage. See the installation manual with the values in the "Technical supplied with your machine for detailed specifications"...
pin face of the plug. Fuse covers are available from any good electrical store. Fitting a different plug As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug, proceed as follows: Connect the green - yellow or green (earth) wire to the terminal in the plug...
Preparation Read “Quick Guide - Adjusting Water Softening System” before this section! The regeneration of the water softening Read “Safety Instructions” section first! system can be done in all programmes Tips for energy saving during drying step. When regeneration occurs, duration, energy and water Following information will help you use the consumption of the programme increase.
Adding salt Water softening system needs to be regenerated in order for the product to operate with the same performance continuously. Dishwasher salt is used for this purpose. Use only special softening salts produced particularly for the dishwashers in your machine. You can put about 2 kg of softening It is recommended to use granule- or salt into the salt reservoir.
Page 19
the manufacturer of the detergent for further questions. Do not put solvents into the detergent dispenser. There is the risk of explosion! Put the detergent into the detergent dispenser just before operating the machine as illustrated below. 1. Push the latch to right to open the 3.
Tablet detergents 3. After the empty washing cycle, review the user manual and readjust the water In addition to the conventional tablet hardness level so as to suit the water detergents, there are also commercially supply. available detergent tablets that show water 4.
3. Slightly press the point (B) of the Decorative prints of chinaware as well reservoir lid to close it. as aluminium and silver items may get discoloured or tarnished after washing in the dishwasher just as it happens in handwashing as well. Some delicate glass types and crystals may become dull in time.
Page 22
Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware 22/EN...
Cutlery basket Cutlery basket (depends on model) (depends on model) Cutlery basket is designed to wash your Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an dishes such as knife, fork, spoon, etc. in an efficient manner.
Collapsible lower basket tines Collapsible lower basket tines (depends on model) (depends on model) There are foldable tines (A) located at There are foldable tines (A) located at the lower basket of the machine are the lower basket of the machine are designed for an easier placement of large designed for an easier placement of large pieces such as pans, bowls, etc.
Tray Wash Supports SoftTouch Accessory (depends on model) (depends on model) Use the supports to wash trays in the The SoftTouch Accessory found in the bottom basket. lower basket of your machine enables a See the Auxiliary functions section for safe washing for your fragile glasses.
Lower basket multipurpose / To close the racks: 1. Fold the rack (A). height adjustable service rack 2. Slide the rack up (B). (depends on model) This accessory located at the lower basket 3. Put the rack in vertical position (C). of your machine allows you to easily wash 4.
Upper basket height adjustable Upper basket multipurpose rack service rack (depends on model) (depends on model) Use the lower and upper parts of the height This accessory located at the upper basket adjustable racks in the upper basket of of your machine allows you to easily wash the machine by sliding them down or up pieces such as extra long ladles and bread according to the heights of the glasses,...
Adjusting the height of the upper To lower the basket, while it is in the uppermost position; basket 1. Hold the upper basket wires with both (depends on model) hands, slightly lift up the basket and The upper basket height adjustment simultaneously push and release the mechanism has been designed for you to latches shown in the figure (B).
Height setting with empty basket Collapsible upper basket wires (depends on model) (depends on model) In this model, the height setting of the You can use collapsible wires when you upper basket may be changed using the need a larger space for your dishes in the wheels which are mounted at two different upper basket of your machine.
Ceiling cutlery basket (depends on model) Ceiling cutlery basket is designed to wash your cutlery items such as forks, spoons and etc. by placing them between the bars on the basket. When the central tray is in the lower position, you can load long/high items such as coffee cups, ladles, etc.
Operating the product Auxiliary functions Read “Safety Instructions” section first! Washing programmes of your dishwasher Read “Quick Quide” before this are designed to obtain the best cleaning section. effect, considering the type of the soiling, soiling degree and properties of the dishes to be washed.
Page 32
AquaIntense Function SteamGloss Function (depends on model) (Depends on model) AquaIntense impeller It provides superior drying performance. located under the Changing Warning Sound Volume lower impeller helps 1. After turning on your machine, press washing your heavily and hold the Time Delay and Start / soiled dishes placed Pause / Cancel keys respectively.
SelfDry Floor illumination (Depends on the Model) Warning to show that machine is in Thanks to the “SelfDry” feature on your washing phase machine, the drying effectiveness of your (depends on the model) machine is improved and power is saved. Your machine reflects a light to the floor There are two options, namely “OFF”...
3. Set the desired time by pressing the Pay attention not to open the door of Time Delay key. Each press on the key the machine when it is running. There will increase up to 9 hours with 3-hour may be a rush of vapour when you increments.
2. Press the On/Off key to switch off your Rinse Aid Indicator ( ) machine. Please check the rinse aid indicator on the 3. Close the tap. display to see whether there is adequate 4. Unplug the machine from the socket. amount of rinse aid in the dishwasher or not.
Maintenance and Cleaning the filters cleaning Clean the filters at least once a week in order for the machine operates efficiently. Read “Safety Instructions” section first! Check if food residues are left on the filters. Unplug the product and turn off the If there are food residues on filters, take tap before attempting any cleaning them out and clean well under running...
Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose. Check the filter and the hose regularly and clean them if necessary.
Cleaning the impellers Clean the impellers at least once a week in order for the machine operates efficiently. Lower impeller Do not try to rotate the impeller by Check if the holes on the lower impeller (1) holding its ends. Trying to rotate the are clogged.
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
Page 40
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
Page 41
There is a different odour in the machine A new machine has a peculiar odour. It will fade out after a couple of washes. • Filters are clogged. >>> Check if the filter system is clean. Clean the filter system regularly as illustrated in section “Cleaning and Care”.
Page 42
• Opening of the detergent dispenser lid is prevented during washing. >>> Place the dishes in a way that will not prevent the detergent dispenser lid from opening and the water going into the machine from impellers. • Detergent is stored under unsuitable conditions. >>> If you are using powder detergent, do not store the detergent package in humid places.
Page 43
Foam forms in the machine. • Dishes are washed with hand-wash detergent by hand but not rinsed before placing them into the machine. >>> Hand-wash detergents do not contain antifoam. There is no need to hand-wash the dishes before placing them into the machine. Removing the coarse soil on the dishes under tap water, with a tissue paper or fork will be sufficient.
• Repairs necessary as a direct or indirect result of: - Accidental damage, misuse or abuse of a product. - An attempted repair of a product by anyone other than a Zenith Approved Engineer (the “Engineer”). - Installation or use of a product where such installation or use fails to meet the require- ments contained in this guarantee or the User Instructions Booklet.
Page 45
11. Optional extras, where available (i.e. extendable feet) are supplied on a chargeable basis only. Does Zenith offer replacements? This is a repair-only guarantee. On occasion, the Manufacturer may at its sole discretion, replace your product with a new product instead of carrying out a repair. Where a replacement is offered, this would normally be an identical model but when this is not possible, a model of similar specification will be provided.
This guarantee is provided by Beko plc. Beko House, 1 Greenhill Crescent, Watford, Hertfordshire. WD18 8QU. Beko plc is registered in England and Wales with company registration number 02415578. ZENITH UK AND NORTHERN IRELAND BUILT-IN APPLIANCES GUARANTEE TERMS AND CONDITIONS 46/EN...
If you have purchased a built-in or integrated appliance in the United Kingdom or Northern Ireland, then the standard 12-month guarantee will be extended to 24 months, under the same terms and conditions as detailed in our Standard Guarantee Terms and Conditions.
Page 48
Please have your Model number and Serial number available when you call us, as you may be required to input your serial number into your telephone keypad during your call. UK Mainland & Northern Ireland: 0333 207 2028 Landline or mobile calls to 0333 numbers cost no more than calls to geographic numbers 01 or 02, and are charged at the basic rate.
Need help?
Do you have a question about the ZDWI601 and is the answer not in the manual?
Questions and answers