Dual SD Card Reader/
Lecteur de carte pour carte mémoire SD double
Operating Instructions/Mode d'emploi/
Bedienungsanleitung
NX-DF1CL
English
Memory card reader
Before operating this reader, please read this manual thoroughly.
WARNING
To reduce fire or shock hazard, do not expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified
personnel only.
For the customers in the U.S.A.
NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC (POUR
LES CONSOMMATEURS AUX ÉTATS-UNIS. NON APPLICABLE AU CANADA, Y
COMPRIS LA PROVINCE DE QUÉBEC)
Regulatory Information
The number below is for the FCC related matters only.
Regulatory Information
The number below is for the FCC related matters only.
Supplier's Declaration of Conformity
Trade Name : Nextorage
Model : NX-DF1CL
Responsible Party : Violette Engineering Corporation
Address : 313 Park Avenue Suite 300, Falls Church, VA 22046 USA
Mail : info@violetteengineering.com
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION
You are cautioned that any changes or modifications not expressly approved in
this manual could void your authority to operate this equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit di erent from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
For the Customers in Canada
CAN ICES-3(B) / NMB-3(B)
For the Customers in Europe
Disposal of Old Electrical & Electronic Equipment (Applicable in the
European Union and other countries with separate collection systems)
This symbol on the product or on its packaging indicates that this
product shall not be treated as household waste. Instead it shall be
handed over to the appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the
environment and human health, which could be caused by inappropriate
waste handling of this product. The recycling of materials will help to conserve
natural resources. For more detailed information about recycling of this
product, please contact your local Civic O ce, your household waste disposal
service or the shop where you purchased the product.
This product is manufactured by or for Nextorage Corporation.
UK Importer of Record: Nextorage Corporation, Kawasaki-eki-mae Tower Riverk
9F, 12-1, Ekimaehoncho, Kawasaki-ku, Kawasaki City, Kanagawa 210-0007 Japan
Manufacturer's authorized representative:
(UK) 24hour Solutions Ltd. 15 Beaufort Court, Admirals Way, Canary Wharf,
London, E14 9XL United Kingdom
For the Customers in Republic of India
Reduction in the Use of Hazardous Substances in Electrical & Electronic
Equipment (Applicable in Republic of India)
This product and its components, consumables, parts or spares comply with
the hazardous substances restriction of India's E-Waste (Management) Rules.
The maximum allowable concentrations of the restricted substances are 0.1%
by weight in homogenous materials for Lead, Mercury, Hexavalent Chromium,
Polybrominated Biphenyls (PBB) and Polybrominated Diphenyl Ethers (PBDE),
and 0.01% by weight in homogenous materials for Cadmium, except for the
exemptions specified in Schedule II of the aforesaid Rules.
Compatible memory cards
SDXC/SDHC UHS-II memory card、SDXC/SDHC UHS-I memory card、
SDXC/SDHC/SD memory card
Note:
Not all memory cards are guaranteed to operate correctly.
Compatible OS
Windows 10, Windows 11
macOS 13.6.4 or later, macOS 14
note:
Not all proper operations of the PC are guaranteed.
Write protection function
There is a physical write protection switch on each card slot.
The switch prevents unintentional file deletion or accidental rewriting.
In order to enable this feature, the switch must be toggled before connecting
the device to the PC.
Basic Operation
Connecting:
Connect the reader to a computer using the supplied USB cable.
Using the supplied USB cables to connect to USB 10Gbps Type-C port on your
computer enables high speed data transfer.
Using the Reader:
Insert a memory card into the reader.
Removing a memory card/Disconnecting:
Windows users
1.
Select [Safely Remove Hardware] on the task tray, located at the lower
right portion of the screen.
2.
Select the icon of the storage.
3.
Wait until the message "Safe to Remove Hardware" appears.
4.
Disconnect the cable from the computer.
Mac users
1.
Move the icon of the storage to the trash icon.
2.
Disconnect the cable from the computer.
Note:
While the access lamp is lit, data is being accessed. Do not eject the memory
card or remove the reader.
Write protect SW
Write / Read
Read Only
Need help?
Do you have a question about the NX-DF1CL and is the answer not in the manual?
Questions and answers