Page 2
Overview Yellow button Status LEDs Emergency button Radio trigger Blue button Wall mount Loudspeaker Power socket Microphone At the end of this manual you find a User's guide that you can cut out and keep nearby Doro Secure 211.
Page 3
English Symbols and Status LEDs Power (A) Steady on: Mains powered Flashing: Battery operated, no mains connection Call (B) Steady on: Ongoing voice call Flashing: Establishing voice call GSM network Steady on: GSM network available Flashing: Battery operated, GSM connection established GPRS (D) Steady on: Ongoing GPRS traffic...
The mains plug outlet must be close to the equipment and easily accessible. Place the Doro Secure 211 in the centre of the house or in the room the user normally occupy. You are advised to test the equipment in conjunc- tion with installation and programming, i.e.
Page 5
25 different triggers. Regardless of what kind of device you're pairing to your Doro Secure 211, the process is basically the same. For more information about pairing de- vices, see the manual that came with the device you want to pair.
English Others Troubleshooting Doro Secure 211 is delivered pre-programmed by the service provider. Battery Doro Secure 211 Connect the power adapter and charge the battery for 72 hours. The battery charges when connected to the mains power. Radio trigger When the battery is low in the radio trigger the service pro- vider is automatically notified.
As a matter of precaution, we recommend disconnecting the charger during a thunderstorm. Batteries are consumables and are not included in any guarantee. This guarantee does not apply if batteries other than DORO original batteries are used. Specifications Network:...
Page 8
English collected together with waste electrical and electronic equipment on the basis of Direc- tive 2002/96/EC, batteries or accumulators shall be removed from the collected waste electrical and electronic equipment.
English User's Guide Emergency call From Doro Secure 211 Press the Emergency button (2) to initiate a call. Await response from the service provider. The call is ended by the service provider. From radio trigger Press and hold the Radio trigger button (7) to initiate a call to your service provider.
Need help?
Do you have a question about the Secure 211 and is the answer not in the manual?
Questions and answers