Do you have a question about the E3600LFP and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for PION POWER E3600LFP
Page 1
E3600 DC OUTPUT DC INPUT 12V-30A 12V~30V 32V~150V 150W(MAX) 1200W(MAX)*2 12V-5A 12V-10A AC OUTPUT - 3600W 100W USER MANUAL Please read the user manual thoroughly before using support@pionpowertech.com...
SPECIFICATIONS UPS Power Capacity 100Vac~120Vac, 30A Max 3072Wh (51.2V/60Ah) Battery Type Rated Power 3600W LiFePO4 (3500+ Cycles to 80%) AC Input Peak Power 100Vac-120Vac, 30A Max, 3200W Max 7200W when 2 units are connected DC5521: Voc 12V~30V / 150W Max /7A Max Smart App Solar Input Wi-Fi, Bluetooth...
Page 4
AC INPUT 100Vac~120Vac 50/60HZ MJ25 (3+2) *1 1800W Max (Charging cable with 15A) 3200W Max (Charging cable with 30A) DC INPUT 5521 *1 12V~30V Max 7A Max 150W XT60-M *2 32V~150V Max 20A Max 1200W*2 EXTRA BATTERY PORT MJ32 *2 Cascade with max 4 pieces of EP3000-48V HOW TO TURN ON/OFF DC/USB/WIRELESS CHARGER E3600...
Page 5
DETAILS AND OPERATING INSTRUCTIONS OF THE TOUCH SCREEN Home page 1 ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑰ ⑬ ⑱ ⑭ ⑮ ⑲ ⑯ Bluetooth Connection FANS On Time Switch Button WiFi Connection Timer Switch On Battery Temperature Display of Input Connection of...
Page 6
HOW TO SET UP THE TIME AND LANGUAGE OF THE SCREEN ? Click "Menu" (Picture 1). Then click "System Settings” (Picture 2). (Picture 1) (Picture 2) 1: Page up/down by clicking "∧"/"∨" on the left side. 2: Adjust the time by clicking "Time setting” (Picture 3). (Picture 3) 3: Adjust the language by clicking "Language"...
Page 7
HOW TO CONNECT WITH THE APP ? Click "Menu" (Picture 1). Then click "System Settings" (Picture 2). (Picture 1) (Picture 2) 1: Click "WiFi reset" (Picture 5). 2: Click "√" to reset the WiFi and enter into the pairing mode (Picture 6). Search for the device model on the app.
Page 8
HOW TO CHANGE THE SETTINGS OF INPUT AND OUTPUT ? Click "Menu" (Picture 1). Then click "Input Output Settings" (Picture 7). (Picture 1) (Picture 7) Click each option to make the corresponding settings (Picture 8). (Picture 8) support@pionpowertech.com...
Slotted Screwdriver *1 Accessory Pouch *1 User Manual *1 Optional product accessory (* The following accessories are not included in the standard package and can be purchased separately from PION POWER) EP3000-48V 3072Wh Completed set for 30A AC Cable *1 (NEMA TT-30)
Page 10
This UPS function only support protection for loads under 3600W(120V), we recommend that you only connect one device at a time to avoid overload and thus result in protection failure. PION POWER is not responsible for any devices damage or loss of data resulting from failure to follow the instructions. E3600...
Page 11
HOW TO CHARGE THE E3600 LFP BY AC CHARGING ? A 15A cable will be included as a standard accessory. The type of the cable will be automatically detected by the power station. When you charge the power station with a 15A cable. AC INPUT Overcurrent Protection Synchronous...
CHARGING FROM THE VEHICLE E3600 DC OUTPUT DC INPUT 12V-30A 12V~30V 32V~150V 150W(MAX) 1200W(MAX)*2 12V-5A 12V-10A AC OUTPUT - 3600W 100W SOLAR CHARGING DC5521 Charging Port: Solar panel/car charger 12V~30V, supports up to 150W input. The open-circuit voltage of the solar panel must be less than 25V. XT60-M Charging Port: Supports charging with a solar panel operating voltage in the range of 32V-150V, up to 2400W.
Page 13
32V~150V 150W(MAX) 1200W(MAX)*2 MC4 Cable ※ We recommend using PION POWER solar panels for the best experience! The open-circuit voltage of a single solar panel should be less than 150V, and the operating voltage should be greater than 32V. support@pionpowertech.com...
Page 14
MC4 Cable ※ We recommend using PION POWER solar panels for the best experience! The open-circuit voltage of a single solar panel should be less than 75V, and the operating voltage should be greater than 16V. To charge the E3600 LFP using three solar panels in series...
Page 15
(NOTE:This parallel charging cable is sold separately) ※ We recommend using PION POWER solar panels for the best experience! The open-circuit voltage of a single solar panel should be less than 150V, and the operating voltage should be greater than 32V.
Page 16
DO NOT WIRE FOUR SOLAR PANELS IN SERIES! DC INPUT 12V~30V 32V~150V 150W(MAX) 1200W(MAX)*2 ※ PV(XT60) Port Only work within 32V~150V Open Circuit voltage, exceeding 150V will damage the machine. FAQS Q1: What kind of battery is used in the E3600 LFP? How long can it last? A:...
Page 17
"User Manual," or as authorized in Pion Power's current product literature. In compliance with laws and regulations, Pion Power reserves all rights for final explanation, and to change these terms and conditions at any time without prior notice. In the event that any revisions are made, the revised terms and conditions shall be posted on our website immediately.
Page 18
It is prohibited to use this product as a car jump starter; it can only be used to charge the car battery. Do not use accessories or parts other than those provided by PION POWER. Please visit our website website www.pionpowertech.com or contact our support team for a complete list of accessories and parts.
Page 19
The battery will not be able to start after being over-discharged, please dispose of it according to the principle of disposal. EXCLUSIONS Pion Power's warranty does not apply to: Misused, abused, modified, damaged by accident, or used for anything other than normal consumer use as authorized in PION POWER’s current product literature.
Page 20
This product has passed inspection, meets the standards, and is approved for factory release. Product Qualification Certificate Inspection Date: Inspector: ONTARIO, CANADA Address: 3761 Victoria Park Ave #9, Scarborough, ON M1W 3S2 Phone: +1 (416) 756-9210 Email: support@pionpowertech.com http://www.pionpowertech.com...
Need help?
Do you have a question about the E3600LFP and is the answer not in the manual?
Questions and answers