Page 1
These instructions are only valid if the country code appears on the appliance. If the code does not appear on the appliance, refer to the technical instructions for adapting the appliance to the conditions for use in that country. Model: HZ898 HZ898_EN_A5_v1_20250114.indb 1 HZ898_EN_A5_v1_20250114.indb 1 2025/1/14 17:20...
Page 2
Safety Instructions Important: • Read this manual carefully and keep for reference. • Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment. •...
Page 3
• Do not spray aerosols in the vicinity of this appliance while it is in operation. • The appliance can only be used for the intended purpose. Buffalo is not liable for any damage caused by improper/ incorrect use. • Great care must be taken by the operator to use the equipment safely to guard it against risk of fire or gas leaks.
Page 4
• Do not insert any objects in the casing of the appliance. • Do not use the appliance after it is dropped or damaged in any way. Have it checked and repaired if necessary by qualified personnel. • Shut off the gas supply to the appliance after each use. •...
Page 5
Gas supply, regulator and hoses • If used with LPG bottled gas: A suitable regulator must be used for butane, propane or mixes. • LPG gas cylinders should rest on a stable, flat surface. • Do not store any other gas cylinder in the vicinity of this or any other appliance.
Instruction Manual pressure regulator BUFFALO prides itself on quality and service, ensuring that at the time of unpacking the contents are supplied fully functional and free of damage. Should you find any damage as a result of transit, please contact your BUFFALO dealer immediately.
Page 7
CE only: These instructions are only valid if the country code appears on the appliance. If the code does not appear on the appliance, refer to the supplier of this appliance to obtain the technical instructions for adapting the appliance to the conditions for use in that country. HZ898 Rating label - LPG: Country of Appliance...
Page 8
Gas connection to the stove Note: • Gas connection shall be fixed with the matched gas adaptor with seal gasket to suit for various national situation. Ensure to use the correct connection kits according to ANNEX A of the standard EN 203-1. •...
Page 9
Gas connection to the gas cylinder Caution! Before installation, ensure the available gas supply corresponds to the one shown on the rating plate located on the rear of the appliance. By default setting, the gas inlet on the lower rear of the appliance is to connect to LPG gas supply. •...
Page 10
Gas conversion from LPG gas to Natural Gas By default configuration, the gas inlet on the lower rear of the appliance is to connect to LPG gas supply. To convert from LPG to NG (natural gas): Gas type Injector Size Ø 1.15mm Caution: •...
Operation Ignition 1. Ensure the control knob is at “OFF” position. 2. Turn on gas supply at the regulator or at the gas cylinder valve. 3. Push down and hold while turning the control knob to the high position 4. While control knob at the high position, press the igniter on the left several times.
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of BUFFALO. Every effort is made to ensure all details are correct at the time of going to press, however, BUFFALO reserve the right to change specifications without notice.
Page 13
• Objeto de la declaración • Objeto da declaração Model • Modèle • Modell • Modello • Modelo {product code(s)} HZ898 Application of Council Directives(s) Toepassing van Europese Richtlijn(en) • Application de la/des directive(s) {relevant legislation and harmonized standards} du Conseil •...
Need help?
Do you have a question about the HZ898 and is the answer not in the manual?
Questions and answers