Download Print this page
Sealey PWM2500.V3 Quick Start Manual
Sealey PWM2500.V3 Quick Start Manual

Sealey PWM2500.V3 Quick Start Manual

Pressure washer, 220bar, 510l/hr, 5.8hp petrol

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear eye
instructions
protection
1. SAFETY
CAUTION: Read the instructions before using the machine. This manual should be kept with the machine and passed on if it is sold.
Machines shall not be used by children. Children should be supervised to ensure that they do not play with the machine.
9
This machine is not intended for use by persons (Including children) with reduced physical, sensory or mental capabilities, or lack of
9
experience and knowledge. This machine MUST be attended during operation.
The appliance shall be disconnected from its power source during cleaning, service and when replacing parts and, if that the
9
removal of the plug is foreseen, it shall be clearly indicated that the removal of the plug has to be such that an operator can check from
any of the points to which he has access that the plug remains removed.
WARNING! Risk of explosion DO NOT spray flammable liquids.
WARNING! High pressure cleaners shall not be used by children or untrained personnel.
WARNING! To ensure machine safety, use only original spare parts from the manufacturer or approved by the manufacturer.
WARNING! DO NOT use the machine if a supply cord or important parts of the machine are damaged, e.g. Safety devices, high
pressure hoses, trigger gun.
WARNING! RISK OF FLUID INJECTION. This washer operates at fluid pressures and velocities high enough to penetrate human and
animal flesh. If there is an occurrence of fluid injection seek medical help immediately.
Ensure you comply with the water supply company regulations before connecting to the mains. If you are connecting to the mains
9
drinking water supply ensure you have a back flow preventer valve installed.
The water supply hose must be reinforced and have an internal diameter of 13mm (1/2"). The minimum water supply rate must be at
9
least equal to the cleaner capacity. The water temperature must not exceed 50°C and the pressure must not exceed 10bar/145psi.
WARNING! Use the washer on a flat, level surface, in a horizontal position. Failure to do so will invalidate your warranty.
Keep all persons and animals at a safe distance from the hose working area. It is difficult to give an exact safe distance as it will depend
9
upon your circumstances. We recommend at least 15 metres (16 yards). Also ensure other persons are aware before you start to
depress the washer trigger.
DO NOT use the washer if you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
1.1.
SPECIFIC PRESSURE WASHER SAFETY WARNINGS!
DANGER indicates a hazard which, if not avoided, will result in death or serious injury.
WARNING! indicates a hazard which, if not avoided, could result in death or serious injury.
CAUTION indicates a hazard which, if not avoided, could result in minor or moderate injury.
WARNING! POISONOUS GAS HAZARD. Engine exhaust contains carbon monoxide, a poisonous gas that could kill you in minutes.
You CANNOT smell it, see it, or taste it. Even if you do not smell exhaust fumes, you could still be exposed to carbon monoxide gas.
Some chemicals or detergents could be harmful if inhaled or ingested, resulting in death, serious injury, nausea, fainting or poisoning.
ONLY operate this product outside and far away from windows, doors, and vents to reduce the risk of carbon monoxide gas from
9
accumulating and potentially being drawn towards occupied spaces.
DO NOT run this product inside homes, garages, basements, crawlspaces, sheds, or other partially-enclosed spaces even if using
8
fans or opening doors and windows for ventilation. Carbon monoxide can quickly build up in these spaces and can linger for hours,
even after this product has shut off.
ALWAYS place this product downwind and point the engine exhaust away from occupied spaces. If you start to feel sick, dizzy, or
9
weak while using this product, shut it off and get to fresh air IMMEDIATELY. See a doctor. You may have carbon monoxide poisoning.
Use a respirator or mask whenever there is a chance that vapours may be inhaled when using chemicals.
9
Starter cord kickback (rapid retraction) will pull hand and arm toward engine faster than you can let go which could result in serious
9
injury i.e. broken bones, fractures, bruises, or sprains.
© Jack Sealey Limited
PRESSURE WASHER, 220BAR, 510L/HR,
5.8HP PETROL
PWM2500.V3
MODEL NO:
Wear ear
Wear protective
protection
gloves
Original Language Version
Wear safety
Wear protective
footwear
clothing
DO NOT direct jet
Hot surfaces
against yourself,
other
persons, animals,
electrical
equipment or
the machine itself
PWM2500.V3 Issue:2 19/12/24

Advertisement

loading
Need help?

Need help?

Do you have a question about the PWM2500.V3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sealey PWM2500.V3

  • Page 1 PWM2500.V3 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2: Maintenance

    WARNING! DO NOT use combustion engine powered machine indoors unless adequate ventilation conforms to local standards in ‰ force. WARNING! Ensure that any exhaust emissions are not in the vicinity of air intakes. ‰ Original Language Version © Jack Sealey Limited PWM2500.V3 Issue:2 19/12/24...
  • Page 3: Specification

    Mounted on robust painted frame with two sucker feet and two solid wheels for stability and easy portability. Supplied with five quick release spray nozzles: 0°, 15°, 25°, 40° and low pressure nozzle for use with detergent. 3. SPECIFICATION Model No: ............PWM2500.V3 Engine Capacity: ............209cc Engine Power: ............... 4.8hp Engine Type: ......4-Stroke, Single Cylinder, Petrol...
  • Page 4 After this, valve closes returning pump to normal operation. Pressure hose DO NOT allow hoses to come into contact with engine muffler during or immediately after use. DO NOT pull unit by the pressure hose. PWM2500.V3 Issue:2 19/12/24 Original Language Version © Jack Sealey Limited...
  • Page 5: Operation

    ( B), high pressure hose (C), nozzle extension (D), and spray gun (E). 7.1.3.1. Lubricate all connections shown below, following these instructions: Inspect and clean connecting surfaces prior to lubrication and assembly. PWM2500.V3 Issue:2 19/12/24 Original Language Version © Jack Sealey Limited...
  • Page 6: Using Detergent

    Kickback from spray gun can cause you to fall. CAUTION Use the pressure washer only OUTSIDE in a fully VENTILATED area, place the pressure washer on surfaces able to withstand the force of the spray. PWM2500.V3 Issue:2 19/12/24 Original Language Version © Jack Sealey Limited...
  • Page 7: Using The Spray Gun

    Apply a high pressure spray to a small area, and then check the surface for damage. If no damage is found, it is okay to continue cleaning. 7.8.4. 7.4 Start at the top of the area to be rinsed, working down with same overlapping strokes as you used for washing and applying detergent. PWM2500.V3 Issue:2 19/12/24 Original Language Version © Jack Sealey Limited...
  • Page 8: Cleaning Tips

    NOTE: The following procedures are in addition to the regular checks and maintenance explained as part of the regular operation of the engine and equipment. PWM2500.V3 Issue:2 19/12/24 Original Language Version © Jack Sealey Limited...
  • Page 9: Pump Maintenance

    Apply dielectric spark plug boot protector (not included) to the end of the spark plug and reattach the wire securely. 8.10. AIR FILTER MAINTENANCE 8.10.1. Remove the Air Filter Cover and the air filter(s) and check for dirt. Clean as described below. Cleaning: 8.10.1.1. For paper filters: PWM2500.V3 Issue:2 19/12/24 Original Language Version © Jack Sealey Limited...
  • Page 10: Long Term Storage

    Slowly pull the starter cord a few times to clean oil from the cylinder or to eject any antifreeze from the pump which were added prior to storage. Remove the spark plug from the cylinder. Wipe oil from the spark plug and return it to the cylinder and retighten. Reconnect the spark plug wire. PWM2500.V3 Issue:2 19/12/24 Original Language Version © Jack Sealey Limited...
  • Page 11: Troubleshooting

    4. Use only fresh 87+ octane stabilizer-treated unleaded petrol. Do not use petrol with more than 10% ethanol (E15, E2O, E85, etc.). 5. Diagnose and repair compression. 5. Incorrect compression (See “Engine will not start: COMPRESSION RELATED section.) PWM2500.V3 Issue:2 19/12/24 Original Language Version © Jack Sealey Limited...
  • Page 12 7. Dissolve by running warm water through the injection tube. Run clean water through injector until clear. Water leaking at 1. Worn or broken o-ring. 1. Tighten hose connection spray gun/wand 2. Loose hose connection. connection PWM2500.V3 Issue:2 19/12/24 Original Language Version © Jack Sealey Limited...
  • Page 13: Weee Regulations

    Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 sales@sealey.co.uk...