Subscribe to Our Youtube Channel
Summary of Contents for Bosche HLS Touch
- Page 1 BOSCHE Pallet truck with scale HLS Touch Operating Manual - Translation of the original - (keep for future use) Last revised: 2025-03-03...
- Page 2 This manual has been created on: 2024-11-05 Copyright The Bosche GmbH & Co. KG company retains all rights for this document. Copying, disclosure to third parties or use of its contents are forbidden without our express approval © 2024 Serial number The serial number is located on the frame.
- Page 3 The manufacturer's contact data is listed on the reverse of the title page. If you have any queries or problems, please contact the manufacturer without delay. Note If you have any questions for Bosche GmbH & Co. KG, please have the serial number to hand. Last revised:...
-
Page 4: Table Of Contents
Pallet truck with scale HLS Touch Table of contents Table of contents 1 Safety ........................3 1.1 For your safety ....................3 1.1.1 General ....................3 1.1.2 Safety symbols in this manual..............4 1.2 Intended use ....................4 1.3 Inappropriate use .................... 4 1.4 Hazard warnings on the Pallet truck with scale.......... -
Page 5: Safety
Pallet truck with scale HLS Touch Safety | 1 Safety This chapter warns against possible risks when handling the device. The information for detection of risks contained in this chapter is intended to allow a save and correct operation. It is important to read and adhere to this operating manual and particularly this chapter prior to operating this device. -
Page 6: Safety Symbols In This Manual
Intended use The Pallet truck with scale HLS Touch is used to measure the weight of loads and to transport goods. Any further use is considered as not in accordance with the intended use. The manufacturer does not assume any liability for resulting damage. -
Page 7: Hazard Warnings On The Pallet Truck With Scale
Pallet truck with scale HLS Touch Safety | 1 Hazard warnings on the Pallet truck with scale Warning sign with instructions max. load capacity On the Pallet truck with scale, you will find pictograms according to EN ISO 7010, which indicate special behaviour. These may not be removed and must be maintained in legible condition. -
Page 8: Description Of The Dangers
The BOSCHE company offers a restricted warranty for components, which became faulty due to strain or material faults. The warranty starts with the date of delivery. The BOSCHE company retains the right to repair or replace components. Repair work executed during the warranty period will not extend the period of warranty. -
Page 9: Transport, Installation, Connection
Pallet truck with scale HLS Touch Transport, installation, connection | 2 Transport, installation, connection Control When the device is delivered, check the packaging, the device and possible accessories for visible damage. Packaging and disposal Keep all parts of the original packaging for a possible return. -
Page 10: Connection
2 | Transport, installation, connection Pallet truck with scale HLS Touch Connection Note Ensure that a 230 V AC voltage supply is available on the installation site (unless operation with rechargeable batteries is intended). Connecting cables must be installed, so that damage and hazards (e.g. tripping hazards) are excluded. -
Page 11: Operation
Pallet truck with scale HLS Touch Operation | 3 Operation Assembly and operation of the pallet truck Item Designation Drawbar Drawbar handle Industrial PC with 10’ display Battery switch (4) with 2 Makita rechargeable batteries (5) Thermal printer (optional) Load fork... -
Page 12: Functional Description Of The Pallet Truck
3 | Operation Pallet truck with scale HLS Touch Functional description of the pallet truck The pallet truck is used as a hand-operated hydraulic device. The pallet can be driven or hydraulically lowered/lifted by operating the drawbar handle (2). The pallet truck does not have a brake;... -
Page 13: Operation Of The Pallet Truck
Pallet truck with scale HLS Touch Operation | 3 Operation of the pallet truck Note Only lift or lower the load fork of the pallet truck when it is stationary! Note Make sure that the maximum load capacity of the pallet truck is not exceeded. -
Page 14: Switch Off
3 | Operation Pallet truck with scale HLS Touch • Move the drawbar handle (2) to the lifting position (locked). • Lift the load by pumping the drawbar (1). • Check the data on the screen and confirm the measurements by touching the "Confirm weighing"... -
Page 15: Operation Of The Pallet Truck With Battery Switch
Operation | 3 Operation of the pallet truck with battery switch The Bosche Battery switch enables mobile working with Bosche weighing systems. The weighing system is powered by two batteries, in which first a bat- tery is being discharged. Is this discharged or removed unexpectedly from the device, the battery switch switches to the second battery. -
Page 16: Communication Protocol
3 | Operation Pallet truck with scale HLS Touch • Battery switch started (without power supply unit) with two charged batteries. - Operating-LED lights up blue. - All status indicators light up green. - The battery 1 is discharged, the first status indicator flashes. - Page 17 The software either outputs the saved data as a. CSV file or transfers it directly to a database. Note If you use no weighing software from Bosche, output of measured values is described in its manual. Last revised: BOSCHE Weighing Systems...
-
Page 18: Technical Data
4 | Technical data Pallet truck with scale HLS Touch Technical data Drawing Technical data Feature Value / Unit Weighing range 0 - 2500 kg Resolution 500 g Own weight approx.130 kg Steering wheels Polyurethan Load wheels Tandem Polyurethan Lift... -
Page 19: Supply Data
Pallet truck with scale HLS Touch Technical data | 4 Supply data Feature Value / Unit Electrical supply 230 V, single phase, max. 16 A Battery voltage (internally generated) 18 V DC Ambient conditions Feature Value / Unit Temperature +10 °C to +40 °C Relative humidity max. -
Page 20: Maintenance And Care
Limit stop Maintenance, servicing Only trained service engineers who have been authorised by Bosche are allowed to open the pallet truck. Danger Before opening the pallet truck, you must ensure that it has been safely deenergised and disconnected from the mains. -
Page 21: Maintenance Schedule
Pallet truck with scale HLS Touch Maintenance and care | 5 Maintenance schedule Note When working on the hydraulic system, particular attention must be paid to cleanliness and care. Attention Risk of slipping due to leaking and spilled operating fluids. -
Page 22: Refill Hydraulic Oil
5 | Maintenance and care Pallet truck with scale HLS Touch 5.4.1 Refill hydraulic oil • Lower the load fork completely. Drawbar • Unscrew the oil tank screw plug (1). • Fill hydraulic oil using a syringe (not included in the scope of delivery). - Page 23 Pallet truck with scale HLS Touch Maintenance and care | 5 Lifting the load fork is still not working correctly, it may be due to the pressure adjustment screw (5) on the valve. • Unscrew the allen screw. • Tighten the slotted screw using a slotted screwdriver.
-
Page 24: Troubleshooting
- Low-quality hydraulic oil - Replace hydraulic oil Leakage of hydraulic oil Seals worn or leaking. - Replace seals If the faults or error messages cannot be rectified, please contact Bosche customer service. Last revised: BOSCHE Weighing Systems Page 22... -
Page 25: Contacting Customer Service
Pallet truck with scale HLS Touch Troubleshooting | 6 Contacting customer service Bosche GmbH & Co. KG Reselager Rieden 3 49401 Damme Phone +49 (0)5491 9996890 Fax +49 (0)5491 9996899 E-mail info@bosche.eu Last revised: BOSCHE Weighing Systems Page 23 2025-03-03... -
Page 26: Declaration Of Conformity
7 | Declaration of Conformity Pallet truck with scale HLS Touch Declaration of Conformity Bosche GmbH & Co. KG Reselager Rieden 3 D-49401 Damme Telefon: 0 54 91 / 999 689 - 0 Telefax: 0 54 91 / 999 689 - 9 E-Mail: info@bosche.eu... - Page 28 BOSCHE GmbH & Co. KG 05491 999 689 0 Reselager Rieden 3 Fax 05491 999 689 9 49401 Damme www.bosche.eu Germany info@bosche.eu...
Need help?
Do you have a question about the HLS Touch and is the answer not in the manual?
Questions and answers