Related Manuals for ROWAN ELECTRIC APPLIANCE FLG019E
Summary of Contents for ROWAN ELECTRIC APPLIANCE FLG019E
- Page 1 海宫 145x210mm 16P（16Kx4张）黑白印刷 2024-1-10 14:54:27 TOWER FAN MANUAL ITEM NO.: 6319-WHITE/BLACK MODEL NO.: FLG019E...
-
Page 2: Fcc Statement
FCC STATEMENT WARRANTY INFORMATION FCC STATEMENT POTENTIAL FOR RADIO/TELEVISION INTERFERENCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. -
Page 3: Cleaning And Maintenance
CLEANING AND MAINTENANCE TO CHANGE THE PLUG FUSE If the (2.5 Amp, 125 Volt) replaceable fuse blows, replace the fuse with a new one,the following should ONLY be conducted by a qualified professional: USER SERVICING INSTRUCTIONS 1. Unplug your fan. Grasp plug and remove it from the electric receptacle or other outlet device. Do not unplug by pulling on cord. -
Page 4: Remote Control
REMOTE CONTROL NOTE: THIS UNIT INCLUDES ONE LITHIUM BATTERYCR2025/3V. PLEASE REMOVE THE PROTECTIVE STICKER FROM THE REMOTE CONTROL BATTERY BEFORE OPERATION. To operate the fan with the remote control, aim it toward the control panel on top of the fan tower. -
Page 5: Parts And Assembly
PARTS AND ASSEMBLY PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS Remote control storage Control Panel Air Vent Tabs Fan Housing Power Cord Base Halves Remote Control... - Page 6 Installation and operating instructions Packing list ⊙ Before installation, please carefully check the attached accessories (as shown in the table below): Name Quantity Unit Remarks Host machine Remote control Assembled from Base two parts Instructions At the bottom of the Lock nut product body 1.Take out the two parts of the chassis from the packing box, align the holes of the two parts of...
- Page 7 Figure 2 3. Align the clamping position at the bottom of the whole machine with the clamping hole of the chassis, rotate and clamp in, and rotate the lock nut. (as shown in Figure 3) Figure 3...
- Page 8 OPERATING INSTRUCTIONS Temperature normal mode Timer natural mode sleep mode 1: Plug the cord into a standard 120 Volt AC outlet 2: Function description: 1-5 gear wind speed, 3 kinds of wind mode, 1-12 hours timer, and from left 40°oscillation to right 40°. 3: Display panel: Double 8 display + LED function icon indication, all displays are white.
- Page 9 Operation Declaration 1: plug in the power cord, PCB board is electrified, full screen display for 1 second, after a long beep, all lights out, the product into standby state, double 8 position display “——” 2: press the product start in normal wind 1 gear,double 8 position display “01”, icon light.
- Page 10 power button mode button Speed button timer button OSC button Remote control is the same operation and function as control panel. Wind mode explain Natural wind 1st gear: 1st gear for 4 seconds--stop 4 seconds--2ed gear for 1 seconds, cycle. 1(4s)--stop(4s)--2(1s), cycle 2ed gear: 2ed gear for 1 seconds--1st gear for 4 seconds--2ed gear for 5 seconds--1st gear for 5 seconds--stop 5 seconds--2ed gear for 4 seconds--1st gear for 5 seconds--2ed gear for 5...
- Page 11 PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic safety precautions should always be taken including the following: WARNING: To reduce the risk of fire, electrical shock, or injury to person: 1. Read all instructions before using this appliance. 2.
- Page 12 control device. 24. This product employs overload protection (fuse).A blown fuse indicates an overload or short-circuit situation. lf the fuse blows, unplug the product from the outlet, Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product.
- Page 16 213-4467172 661-4358826 (8:30am - 5:30pm P.S.T.) SE REQUIERE PRUEBA DE COMPRA CON FECHA PARA SERVICIO BAJO GARANTÍ A. Address: ROWAN ELECTRIC APPLIANCE LLC 28407 Ascent Way, Santa Clarita, CA 91350 Phone: 213-4467172 or 661-4358826...
Need help?
Do you have a question about the FLG019E and is the answer not in the manual?
Questions and answers