Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for MeiTrack MD101
Summary of Contents for MeiTrack MD101
- Page 1 MEITRACK_MD101_User Guide MEITRACK® AI Dashcam MD101 User Guide...
-
Page 2: Change History
The user manual may be changed without notice. Without prior written consent of Meitrack Group, this user manual, or any part thereof, may not be reproduced for any purpose whatsoever, or transmitted in any form, either electronically or mechanically, including photocopying and recording. -
Page 3: Precautions For Use
5. Please do not use unofficially approved or provided power and data cables. 6. Please do not dismantle the equipment and accessories without authorization, otherwise the equipment and accessories will not Copyright © 2024 Meitrack Group All rights reserved. - 3 -... -
Page 4: Table Of Contents
6.2 APP Connect to MD101 ..............................- 15 - 6.3 ADAS/DMS APP Video Render ............................- 16 - 6.4 Setting MD101 and Vehicle Parameters .........................- 17 - 6.5 ADAS & DMS Calibration ..............................- 17 - 6.6 Modifying Time Zone ..............................- 19 - 6.7 Indoor Simulation Test ..............................- 20 -... - Page 5 9.2.7 Driver Absence Detected (YCW) ..........................- 47 - 9.2.8 Infrared Blocking Warning (SUNGLASS) .........................- 48 - 10 FAQ ......................................- 48 - 10.1 Simple Troubleshooting ..............................- 48 - 10.2 Simple FAQ ..................................- 49 - Copyright © 2024 Meitrack Group All rights reserved. - 5 -...
-
Page 6: Product Introduction
MEITRACK_MD101_ User Guide 1 Product Introduction MD101 is a comprehensive automotive active safety product that integrates functions such as satellite positioning, video surveillance, and active safety. This product meets the needs of fleet monitoring, management, driving safety, and standardized driving behavior. Based on advanced deep learning technology, intelligent algorithms such as Advanced driver-assistance system (ADAS), Driver Monitoring System (DMS), Lane Change Assistance (LCA) and active safety functions can be applied to complex driving scenarios, improve the safety and efficiency of traffic driving, and enhance the overall user experience. -
Page 7: Standard Accessories
Supports APP connection only (Cannot transfer data) Weight 198g Demensions 116mmx66mmx38mm Standard Accessories MD101 Host SOS Alarm Button SIM Card Pin Ejector GPS Antenna 2m Power Cord Standard Quantity MD101 host Copyright © 2024 Meitrack Group All rights reserved. - 7 -... -
Page 8: Product Appearance And Led Status
Tail line outlet Default 6PIN tail cable Locking the position of the DMS Fixed lock for DMS camera camera Locking the position of the Fixed lock for DMS camera ADAS camera Copyright © 2024 Meitrack Group All rights reserved. - 8 -... - Page 9 Support Nano-SIM card Micro card slot Support up to 256GB, Class10 and above ADAS camera 720P ADAS camera Labeling Product model label Icon Name Description Microphone(MIC) Collect sound Speaker(SPK) Play sound Copyright © 2024 Meitrack Group All rights reserved. - 9 -...
-
Page 10: Definitions Of Ports
4G signal is available and the platform is online. Steady off No GPS signal is received. Blink GPS signal available, not located GPS Light Green Steady on GPS signal available and successfully located Copyright © 2024 Meitrack Group All rights reserved. - 10 -... -
Page 11: First Installation
SIM card installation 5.2 Suggest of Main Device Location Installation It is recommended to install the MD101 on the upper edge of the windshield directly above the steering wheel, as shown in the figure. To ensure safe driving and maximize the accuracy of AI algorithms, the choice of device installation location should be based on th e following principles: ⚫... -
Page 12: Dms And Adas Camera Adjustment
Note: APP can view AI video rendering effect, please see 6.3 ADAS/DMS APP video rendering. Example of DMS camera wrong angle: Copyright © 2024 Meitrack Group All rights reserved. - 12 -... -
Page 13: Host Wiring
Start the vehicle and turn on/off the left or right turn signal. Use a test pen to detect the fuse interface. If the interface lit up or turned off in sync with the turn signal, then that interface the left/right turn signal switch check port. Copyright © 2024 Meitrack Group All rights reserved. - 13 -... -
Page 14: App Configuration
Search for the "Viidure" app in the mobile Google app market or Appstore, download and install it. Note: If Google Market is unable to download or install, please download it through the following link. https://www.meitrack.com/cd-download/Aided_Software/viidure.apk Copyright © 2024 Meitrack Group All rights reserved. - 14 -... -
Page 15: App Connect To Md101
6.2 APP Connect to MD101 MD101 is connected to an external power source and turned on. Ensure that the recording blue light is always on. Press the WiFi button on the device and you will hear a voice reminder saying "WiFi is on" to turn on the WiFi function. -
Page 16: Adas/Dms App Video Render
MEITRACK_MD101_ User Guide Note: 1. An MD101 device can only be connected to one phone at a time, otherwise errors may occur. 2. If WIFI cannot be found, please check if the ACC line is active. 6.3 ADAS/DMS APP Video Render After connecting to MD101, click Recorder Settings - Algorithm Settings (as shown below). -
Page 17: Setting Md101 And Vehicle Parameters
10-20cm compared to the actual parameters of the device position. This method can reduce some false alarms. 6.5 ADAS & DMS Calibration 1. Select "AI Setting" - "Steering Wheel Direction" to select the direction of the steering wheel, which is left by default. Copyright © 2024 Meitrack Group All rights reserved. - 17 -... - Page 18 MEITRACK_MD101_ User Guide 2. MD101 adopts automatic calibration. Before the first calibration, the device does not output any alerts. When the driving speed is detected to be consistently greater than 20 km/h, it will automatically enter the calibration. 3. The AI sensitivity parameters are described as follows：...
-
Page 19: Modifying Time Zone
6.6 Modifying Time Zone (1) The device displays GMT+8 by default, and the user needs to change it to the local time zone on the "Camera Settings-Time Zone" page of the APP. Copyright © 2024 Meitrack Group All rights reserved. - 19 -... -
Page 20: Indoor Simulation Test
(4) Configure platform parameters. Fill in the platform's IP, port, and protocol (refer to 7.1). (5) Click on the firmware version in the app, and upon hearing "Simulated speed is on", you can begin simulated testing with the default speed of 60 km/h. Copyright © 2024 Meitrack Group All rights reserved. - 20 -... -
Page 21: Platform Configuration
Note: Indoor testing can assess all DMS functions, but ADAS function testing requires simulated road videos, which can be provided upon request. 7 Platform Configuration 7.1 Platform Parameter Settings After MD101 is connected, enter the APP setting interface - Platform setting - enter platform parameters (as shown below) - click "OK". IP : mdvr.trackingmate.com OR 67.203.13.43 Port: 8506 Server protocol: 2019 Copyright ©... -
Page 22: Adding Devices To The Platform
(1) MD101 supports dual IP login, just enter the corresponding IP and port. The agreement always fills in "2019". (2) The MD101 uses APN automatic recognition. If automatic configuration fails or you need to set a special APN for a special SIM card, please contact us. -
Page 23: Video Monitor
In addition to the AI alarm video, the device's general recording video can also be played on the platform. Click the following icon to enter the platform playback preview. 1. Get the playback video (general recording video) from the device’s Micro SD card. Please follow the steps below: ①②③④⑤ Copyright © 2024 Meitrack Group All rights reserved. - 23 -... - Page 24 At this time, the playback videos can be viewed even if the device is offline. You can see the file details and recording duration in the FTP record. Copyright © 2024 Meitrack Group All rights reserved. - 24 -...
- Page 25 If it is a 10s AI alarm video, the file details recorded in FTP will not record the duration, that is, the start time and end time are the same. However, the 10s video can be played normally. It is just that according to the MD101’s protocol, the AI alarm is triggered immediately when the trigger condition is met.
-
Page 26: Modifying Ai Alarm Parameters On The Platform
You can turn off any alarm or adjust the speed value as needed via APP or sending the text commands from the platform. Please follow the next steps to set up. 7.5 Platform Reports All alarm events can be viewed on the platform. Please follow the following ①②③④⑤⑥ steps to set up. Copyright © 2024 Meitrack Group All rights reserved. - 26 -... -
Page 27: Platform Tracker Talk Settings
7.6 Platform Tracker Talk Settings Select the device, right-click and select the "Tracker Talk" function (Note: if this function is not displayed, it can be called up in "Customize Menus"). Copyright © 2024 Meitrack Group All rights reserved. - 27 -... - Page 28 (1) The URL must contain https, otherwise the platform tracker talk function may not work. (2) The microphone of the computer browser must be turned on, otherwise the sound will not be received. You will see this icon if you open the microphone. Copyright © 2024 Meitrack Group All rights reserved. - 28 -...
-
Page 29: Platform Modification Of Ai Alarm Language
MEITRACK_MD101_ User Guide 7.7 Platform Modification of AI Alarm Language The new version of MD101 currently supports the modification of voice alarms for some countries. The alarm voice can only be set by send the text commands from the platform:... -
Page 30: General Alarm Parameter Settings
① "Turning Angle Setting (degree)" refers to GPS location setting. The default value is 10. Typically, the device uploads its position every 30 seconds. For instance, if this value is set to 0, during normal straight-line driving, at 11:00, 11:30, 12:00, and 12:30, GPS Copyright © 2024 Meitrack Group All rights reserved. - 30 -... -
Page 31: Overspeed Alarm Event Settings
The default maximum driving time is 14400s (4 hours). After triggering, the event will be uploaded to the platform continuously, and the driver needs to stop the vehicle and turn off the engine to rest before the alarm stops. The fatigue driving alarm function is Copyright © 2024 Meitrack Group All rights reserved. - 31 -... - Page 32 MEITRACK_MD101_ User Guide turned on by default. If you don't need this function, can turn off. Copyright © 2024 Meitrack Group All rights reserved. - 32 -...
-
Page 33: Sos Alarm Event Settings
(2) After the SOS alarm is triggered, you need to manually confirm the alarm message on the platform, otherwise, the SOS alarm will continue to be uploaded. Click the icon on the left. Or manually confirm by sending the command on the platform. Copyright © 2024 Meitrack Group All rights reserved. - 33 -... -
Page 34: Geo-Fence Settings
8.6 Geo-fence Settings MD101 supports the geo-fence function, which needs to be set in "Sending command", not "Geo-Fence" in "Management" page (this module is the setting entrance of other product series). Please follow the steps ①②③④⑤⑥ below to set up. -
Page 35: Sharp Acceleration And Deceleration Settings
The detailed description of the default values is as follows: 1-acceleration is on 0-acceleration initial speed is 0 1- acceleration judgment time is 1 second 10-acceleration judgment speed threshold is 10km/h Copyright © 2024 Meitrack Group All rights reserved. - 35 -... -
Page 36: Idle Overtime/Idle Recovery Settings
5km/h, duration of parking without stalling speed: 180s. For general MD101 devices, you only need to set the first parameter (speed) and the second parameter (duration). If the speed does not exceed 5 and the duration exceeds 180s, will trigger idle overtime alarm. Idle recovery does not require additional settings. - Page 37 Find the following records in the corresponding time period of the playback: (2) View the playback on the APP "Loop" page. Note that it is not currently supported to view the video on the "Parking" page. Copyright © 2024 Meitrack Group All rights reserved. - 37 -...
-
Page 38: Introduction To Ai Functions
60Km/h, and the speed of the rear vehicle is 80Km/h, then FCW (TTC)=20/1000/(80-60)*3600=3.6s. Note: FCW defaults to "Medium" sensitivity. When the vehicle's speed is>=30km/h, can meet the trigger condition. At this time, if TTC≤2.7s, trigger; if TTC >2.7s, not trigger. Copyright © 2024 Meitrack Group All rights reserved. - 38 -... -
Page 39: Pedestrian Collision Warning (Pcw)
Note: The vehicle should be connected to the left-in and right-in wires, and the signal lights should be turned on before making a turn, otherwise the turn will trigger a lane departure false alarm. Voice: Lane departure Copyright © 2024 Meitrack Group All rights reserved. - 39 -... -
Page 40: Virtual Bumper/Distance Detection (Hmw)
60Km/h, and the speed of the rear vehicle is 80Km/h, then the HMW distance detection time is 20/1000/80*3600=0.9s Voice: Please keep distance Note: When the front and rear vehicles are in moving, FCW(TTC) is generally longer than HMW distance detection time. Copyright © 2024 Meitrack Group All rights reserved. - 40 -... -
Page 41: Dms Functions
Note: False alarms may occur when the driver wears glasses/ AI fail to detect the driver’s eyes clearly/ driver speaks frequently or opens his mouth wide. Voice: Please take a break Copyright © 2024 Meitrack Group All rights reserved. - 41 -... -
Page 42: Distraction Warning (Fsw)
20 degrees, otherwise it is easy to cause false alarms. (2) After connecting the left/right turn signal, the left/right distraction alarm will no longer be triggered. Voice: Please keep attention Copyright © 2024 Meitrack Group All rights reserved. - 42 -... -
Page 43: Smoking Warning (Smk)
You can adjust the sensitivity to “LOW”. So the alarm only trigger when the smoking time is detected to be >= 3s and the cigarette needs to be lit. Voice: No smoking Copyright © 2024 Meitrack Group All rights reserved. - 43 -... -
Page 44: Calling Warning (Call)
Note: There may be false alarms if you grab your ears with hands/ there are objects near your ears/ there is a strong contrast between light and dark near your ears and your face. Voice: No cellphone using Copyright © 2024 Meitrack Group All rights reserved. - 44 -... -
Page 45: Seatbelt Detection (Seatbelt)
The device recognizes seatbelt status and warns the driver when driving without a seatbelt to ensure safe driving. Note: The DMS camera angle must fully capture the driver's head and entire upper body. Voice: Please fasten your seatbelt Copyright © 2024 Meitrack Group All rights reserved. - 45 -... -
Page 46: Camera Blocking (Hid)
(4) False alarms may occur in dimly lit environments such as driving at night, or when lights are not turned on in the vehicle. 9.2.6 Camera Blocking (HID) The DMS will send a voice alert when it detects occlusion. Voice: Lens occlusion Copyright © 2024 Meitrack Group All rights reserved. - 46 -... -
Page 47: Driver Absence Detected (Ycw)
Recognize the driver's above behavior while driving and issue warnings to ensure driving safety. Voice：Driver abnormally Copyright © 2024 Meitrack Group All rights reserved. - 47 -... -
Page 48: Infrared Blocking Warning (Sunglass)
Please remove the protective film from the camera lens and clean the The video is blurry lens and windshield. There is no audio in the recording Please confirm that you have opened recording in the app. Copyright © 2024 Meitrack Group All rights reserved. - 48 -... -
Page 49: Simple Faq
Q3: Does MD101 support dual IPs, such as logging into both MS03 and CMSV6 platforms simultaneously? A3: Yes, it does. In the APP, set the IP and port for both platforms, then log in and add the MD101 device. Protocols supported by MD101: Standard Active Safety (Su Biao) protocol. Audio encoding format: G711A-EX. - Page 50 A4: The application allows setting the driver's seat, so calibration is based on capturing the driver's facial features. Passengers occupying the front passenger seat and rear seats do not affect DMS calibration. Copyright © 2024 Meitrack Group All rights reserved. - 50 -...
- Page 51 4G being superior to 3G and 2G. (2) Server issues: Heavy user activity during the same time frame may cause delays in FTP uploads. Trying at a different time may resolve this. Copyright © 2024 Meitrack Group All rights reserved. - 51 -...
- Page 52 (3) Turn off AI alerts. Q10: Can MD101's WIFI be used for video uploads, or is a SIM card necessary? A10: No, the device's WIFI is only for connecting the device and the application, without data transmission capability. Video uploads to the platform can only be done using SIM card data.
- Page 53 A15: Regular alerts will be triggered, and the device indicator lights will function normally. However, without a Micro SD card, there won't be any AI alarm types. Q16: Can MD101 be used for large trucks? A16: Yes, it can. In the app's advanced settings, switch the vehicle type to "large" and adjust the device installation parameters accordingly.
- Page 54 Q18: There are many fatigue driving alarms in the report, which are uploaded every 30 seconds. How can I turn off? A18: MD101 has two types of fatigue driving alarms: AI alarm fatigue driving alarm and general alarm fatigue driving. The alarm with alarm video/photo is AI alarm, which is triggered when the driver is fatigued, such as yawning.
- Page 55 Micro SD card. The entire upgrade process takes 3 to 4 minutes, and any operation on the device is prohibited. Q23: What is the difference between AI alarm level 1 and level 2? Copyright © 2024 Meitrack Group All rights reserved. - 55 -...
- Page 56 A23: Level 1 and Level 2 are distinguished by speed thresholds, and the default speed value is 50km/h. The default speed is less than 50 for Level 1, and more than 50 for Level 2. The MD101 protocol is for driver safety considerations, so assort the level to remind the driver and facilitate analysis of driving behavior.
Need help?
Do you have a question about the MD101 and is the answer not in the manual?
Questions and answers