Imetec Bellissima My Pro Beach Waves GT20 100 Manual

SYMBOLS

	Warning
	Class II equipment
	Not suitable for use in the bath or shower
	Prohibited
	Note

DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES

1. Soft curl accessory
2. On/Off button and temperature adjustment
3. Power cable
4. Styler closing lock
5. Technical data
6. Locking/unlocking buttons Soft (1) or defined (7) curl accessory
7. Marked curl accessory
8. Upper heated barrel
9. Cold tip
10. Support base/Protective cover

For the appliance features, refer to the external packaging. Use the supplied accessories only.

USEFUL TIPS

Understanding the usage technique of the hair styler requires small initial precautions that will allow the desired effects to be obtained quickly. The time of use is variable based on experience using the appliance and the desired hairstyle.

• Ensure your hair is dry, clean and without any trace of hairspray, hair mousse or gel.
• Comb your hair ensuring there are no knots. Start straightening from the nape of the neck, proceed on the sides and finish on the forehead.
• During use, when the plates heat and cool, position the appliance on a smooth and heat resistant surface.
• While straightening, careful not to bring the heated parts to close to sensitive parts of the face, ears, neck or skin.
• After use, allow the styler to cool down completely before putting it away.

USE

This appliance is not to be used if it has been dropped or if there are visible signs of damage.

DO NOT use this appliance near bathtubs, showers, basins or other vessels containing water. Never place the appliance into water.

DO NOT spray hairspray while the appliance is switched on. There is a risk of fire.

PREPARING YOUR HAIR

• Wash hair as normal and comb to remove knots.
• Dry your hair and brush from the roots to the ends.
• Divide hair into sections and start straightening from the nape of the neck.

INSTRUCTIONS FOR USE
Select the type of waves you want and then place the accessory in the respective direction:

To achieve a defined wave
Change the direction of the accessory from side "c" to side "d" [Fig. B], by positioning the product as shown in [Fig. D]. Press the specific release buttons (6) with one hand and grasp the cold tip (9) with the other hand, rotating the accessory by hand 180° clockwise.

To achieve a soft wave
Change the direction from side "d" to side "c" by positioning the product as shown in [Fig. E]. Press the specific release buttons (6) with one hand and grasp the cold tip (9) with the other hand, rotating the accessory by hand 180° anti-clockwise.

ATTENTION! Before changing the direction of the accessory, make sure that the styler is cold (1, 7, 8).

• Position the appliance on the suitable support base (10).
  
• Connect the power cable to the mains.

Switch the styler on by sliding the on/off button (2) to the left to the desired temperature from those indicated below:

• Temperature 1: 160°C
• Temperature 2: 180°C
• Temperature 3: 200°C

A LED next to it lights up and flashes until the selected temperature is reached.

• Use one hand to pull the lock of hair, insert it between the heated parts (1 or 7 and 8), close the product and hold it pressed for a few seconds. Repeat the styling operation along the entire length of the hair.
  ATTENTION! Every time you need to place the appliance down during styling operations, house it in the suitable support base [Fig. C]
• After hair styling has been completed, switch the appliance off by sliding the button (2) right to 0 and disconnect it from the socket.
• Wait for the appliance to cool down.
• Before storing the appliance away, insert the support base on the heating element (1 or 7) as protection cover.
• Use the specific closing lock (4) to close and store the styler.

MAINTENANCE AND CLEANING

Always disconnect the appliance from the mains supply before cleaning or performing maintenance.

Make sure all cleaned parts are completely dry before reusing the appliance!

• Disconnect the appliance from the mains.
• Make sure the appliance is cool.
• Clean the external and internal surfaces of the heated parts (8) and the handle of the appliance using a soft and damp cloth.
• Let it dry completely before switching it on again.

STORAGE

Once you have finished using this appliance, make sure it has cooled down completely before putting it away.

DO NOT wrap the supply cord around the appliance.

TECHNICAL DATA

SAFETY NOTES

• After unpacking, make sure the appliance is intact, complete with all its parts as shown in the illustrative guide and with no sign of damage due to transportation. In doubt, do not use the appliance and contact an authorised service centre.
  
  Remove any communication material such as labels, tags etc. from the appliance before use.
  
  Risk of suffocation.
  Children shall not play with the packaging. Keep the plastic bag out of reach of children.
• This appliance must be used only for the purpose for which it was designed, namely as a curling iron for home use. Any other use is considered not compliant with the intended use and therefore dangerous.
• Before connecting the appliance to the mains supply, make sure that the voltage and frequency indicated on the technical data of the appliance correspond to those of the mains supply. These technical data are present on the appliance or on the power supply unit, if any (see illustrative guide).
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• DO NOT use the appliance with wet hands, damp feet or barefoot.
• DO NOT pull the supply cord or the appliance itself to remove the plug from the socket.
• DO NOT pull or lift the appliance by the supply cord.
• DO NOT expose the appliance to humidity or atmosferic agents (rain, sun, etc.) or extreme temperatures.
• The appliance must not be left unattended while it is operated.
• Always disconnect the appliance from the mains supply before cleaning or performing maintenance and when the appliance is not in use.
• If the appliance is faulty or malfunctions, switch it off and do not tamper with it. Contact an authorised technical service centre for any repairs.
• If the supply cord is damaged it must be replaced by an authorised technical service centre, so as to prevent all risks.
• When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off.
• For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA (ideal 10 mA) is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.
  
  
  DO NOT use this appliance near bathtubs, showers, basins or other vessels containing water.
• This appliance shall not come into contact with water, other liquids, spray, steam. For any cleaning and maintenance operation referto the instructions in the relevant chapter.
• This appliance must only be used on human hair. DO NOT use the appliance on animals or on wigs and hair pieces made of synthetic material.
• For the features of the appliance, refer to the external packaging.
• Use the appliance only with the supplied accessories that are an essential part of the appliance.