Table of Contents
Related Manuals for Miele DA6596WSS
Summary of Contents for Miele DA6596WSS
- Page 1 Operating and Installation Instructions Ventilation Hood To prevent accidents and damage to the appliance, you must read these instructions before installing the appliance and using it for the first time. en-US M.-Nr. 12 253 840...
-
Page 2: Table Of Contents
Contents IMPORTANT SAFETY INSTRUCTIONS ............Guide to the appliance ..................12 Description of functions ................... 14 Con@ctivity 2.0 function..................15 Caring for the environment ................16 Operation (Automatic mode) ................17 Cooking with Con@ctivity 2.0 (Automatic mode) ..........17 Temporarily exiting Automatic mode ..............18 Resuming Automatic mode................. - Page 3 Contents Installation recommendations ................32 Drilling diagram for wall mounting............... 32 Plywood backing ....................33 To install a plywood backing ................33 Air venting ......................34 Non-return flap ....................34 Condensate ....................35 Reducing Collar ..................... 35 Electrical connection ................... 36 Activating Con@ctivity 2.0 ................
-
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS This appliance complies with current safety requirements. Improper use of the appliance can lead to personal injury and material damage. Read all instructions before installing or using the appliance for the first time. Only use the appliance for its intended purpose. Keep these operating instructions in a safe place and pass them on to any future user. -
Page 5: Safety With Children
Unauthorized installation, maintenance, and repairs can cause considerable danger for the user. Installation, maintenance, and repairs must only be carried out by a Miele authorized technician. A damaged ventilation hood can be dangerous. Always check for visible signs of damage. Never use a damaged ventilation hood. - Page 6 The function and operation of the protective measures provided in the domestic electrical installation and in this Miele product must also be maintained in isolated operation or in operation that is not synchronized with the grid power supply, or these measures must be replaced by equivalent measures in the installation.
-
Page 7: Correct Use
IMPORTANT SAFETY INSTRUCTIONS Only open the housing as described in the enclosed “Installation diagram” and in the “Cleaning and care” section of this manual. Under no circumstances should any other parts of the housing be opened. Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operation faults. - Page 8 IMPORTANT SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A COOKTOP GREASE FIRE, OBSERVE THE FOLLOWING*: - a) SMOTHER FLAMES with a close fitting lid, cookie sheet, or metal tray then turn off the burner. BE CAREFUL TO PREVENT BURNS.
-
Page 9: Proper Installation
IMPORTANT SAFETY INSTRUCTIONS Fat and debris deposits impair the proper functioning of the ventilation hood. To ensure that cooking vapors are properly cleaned, never use the ventilation hood without the grease filters in place. Please note that the heat rising from the stovetop during cooking can cause the ventilation hood to become very hot. -
Page 10: Cleaning And Maintenance
When installing the exhaust duct, only use pipes or tubes made of non-flammable material. These can be obtained from your Miele dealer or from Miele Technical Service. Always observe local building code requirements when selecting duct material. Exhaust air should not be vented into a chimney or vent flue which is otherwise in use and should not be channeled into ducting which ventilates rooms with fuel-burning installations. -
Page 11: Accessories And Parts
IMPORTANT SAFETY INSTRUCTIONS Accessories and parts Use only genuine original Miele parts. If parts or accessories from other manufacturers are used, the warranty may become void. Defective components should be replaced by Miele original parts only. Only with these parts can safety of the appliance be assured as intended by the manufacturer. -
Page 12: Guide To The Appliance
Guide to the appliance... - Page 13 Guide to the appliance a Telescopic chimney b Chimney c Canopy d Control panel e Grease filter f Edge extraction panels Optional accessories DRP 6590 W glass (3 elements) DRP 6590 W stainless steel (3 elements) DRP 6520 W glass (4 elements) DRP 6520 W stainless steel (4 elements) g Recirculation vent (only for recirculation mode) h Cooktop lighting...
-
Page 14: Description Of Functions
Description of functions The following functions are available on Recirculation mode your ventilation hood, depending on the (Only DA 6596 W requires a model: Recirculation kit and OdorFree Charcoal Filter (available as optional Extraction mode accessories); see “Technical data” for more information.) The air is drawn into the ventilation hood. -
Page 15: Con@Ctivity 2.0 Function
After a brief delay, the operational status of a Miele induction ventilation hood fan also comes on. cooktop. - During cooking, the hood... -
Page 16: Caring For The Environment
Caring for the environment Disposal of the packing Disposal of your old appliance material Do not dispose of this appliance with your household waste. The cardboard box and packing materials protect the appliance during Old appliances may contain materials shipping. They have been designed to that can be recycled. -
Page 17: Operation (Automatic Mode)
Operation (Automatic mode) When Con@ctivity 2.0 is active, the Reaction time hood always operates in Automatic Changing the power setting on the mode (see “Activating Con@ctivity 2.0”). cooktop does not lead to an immediate See “Cooking without Con@ctivity 2.0” increase or decrease in cooking vapors. for information on manually operating For this reason, the hood reacts with a the hood. -
Page 18: Temporarily Exiting Automatic Mode
Operation (Automatic mode) Switching off Resuming Automatic mode Turn off all burners. The ventilation hood resumes Automatic mode: Over the next few minutes, the If the ventilation hood has not been ventilation hood blower setting will decrease one level at a time until the used for a period of approx. -
Page 19: Operation (Manual Mode)
Operation (Manual mode) Cooking without Con@ctivity Selecting the delayed 2.0 (Manual mode) shutdown time The hood can be operated manually if: It is advisable to run the blower for a few minutes after cooking has finished. - The Con@ctivity 2.0 function is not This helps to neutralize any lingering activated. -
Page 20: Power Management
Operation (Manual mode) When power management is turned on, Power management the 1 and B indicators will be The ventilation hood is equipped with a continuously lit. power management system. Power When it is turned off, the 1 and B management helps to save energy. -
Page 21: Operation (Automatic And Manual Modes)
Operation (Automatic and Manual modes) Switch off the blower and the lighting. Filter saturation indicator Press the delayed shutdown The ventilation hood registers the length control and the filter saturation of time it has been operated. control at the same time. The filter saturation indicators show The grease filter symbol ... -
Page 22: Activating/Changing The Charcoal Filter Saturation Indicator
Operation (Automatic and Manual modes) Activating/changing the charcoal Checking the filter saturation filter saturation indicator indicator The charcoal filter is required for the Before the set operating time has run recirculation mode. out, you can check what percentage of the time has elapsed. The filter saturation indicator for the ... -
Page 23: Cleaning And Care
To prevent the surfaces from quickly Stainless steel housing becoming dirty again, we recommend treating them with a stainless steel care General information product (available from Miele). Unsuitable cleaning agents can Important information for appliances damage the surfaces and control with lacquered casing elements. -
Page 24: Panels And Grease Filters For Edge Extraction
Cleaning and care Panels and grease filters for edge extraction The edge extraction panels and the reusable metal grease filters in the appliance remove solid particles (grease, dust, etc.) from the kitchen vapors, preventing soiling of the hood. Pull the front edge of the panels ... - Page 25 Cleaning and care Reinstall the grease filters. When Unsuitable cleaning agents inserting the filters, make sure that Unsuitable cleaners can cause damage the locking clip is facing down. to the filter surfaces if used regularly. Do not use any of the following: - Lime removers - Abrasive powders or abrasive liquids - Aggressive all-purpose cleaners and...
-
Page 26: Replacing The Grease Filter
If you identify any damage, replace the grease filters. Grease filters are available to order via Miele Customer Service (see end of these operating instructions for contact details) or from your Miele dealer. Slide the filter into the back of the... -
Page 27: Resetting The Filter Saturation Counter For The Filter
Cleaning and care Resetting the filter saturation counter for the filter If the filter saturation counter is activated, it must be reset each time the filter is changed. To do this, press the filter saturation indicator twice with the fan turned on and hold it for approx. -
Page 28: Installation
*INSTALLATION* Installation Before installation Before installing the appliance, read all of the information contained 1 non-return flap in this chapter and also in the for fitting into the exhaust socket on “IMPORTANT SAFETY the motor unit (not needed for INSTRUCTIONS”... - Page 29 *INSTALLATION* Installation Installation plan See the installation plan for details of the individual steps involved in the installation of this appliance. Conversion kit for recirculation mode The conversion kit contains an exhaust grille, hose, and hose clips (not supplied, but available as an optional accessory.
-
Page 30: Appliance Dimensions
*INSTALLATION* Installation Appliance dimensions The drawing is not to scale. a Extraction b Recirculation (only DA 6596 W) c Air vent positioned at the top for recirculation... -
Page 31: Distance Between Cooktop And Ventilation Hood (S)
Please also observe the information contained in the “IMPORTANT SAFETY INSTRUCTIONS” section. Minimum distance S Cooking appliance Miele Non-Miele appliance appliance Electric Cooktops 24" (610 mm) Electric Barbeques and Fryers 26"... -
Page 32: Installation Recommendations
*INSTALLATION* Installation Installation recommendations Drilling diagram for wall mounting - A distance of at least 26" (660 mm) is recommended above electric Please follow the directions given in cooktops to provide more workspace the installation instructions supplied and easier cooking under the hood. for drilling. -
Page 33: Plywood Backing
*INSTALLATION* Installation Make a cutting line 3“ (76 mm) above Plywood backing and 3” (76 mm) below the outline of The majority of the weight of the the retaining plate. installed ventilation system will be Find the studs to the left and right supported by the lower retaining of the mounting location by tapping plate. -
Page 34: Air Venting
“Appliance dimensions”). This applies in particular when using flat ducting. If the exhaust is ducted through an outside wall, a Miele wall vent or roof - The ducting should be as short and vent (available as an optional straight as possible. -
Page 35: Condensate
If the ducting is to run through cool rooms or ceiling space, for example, the Miele will not accept warranty claims significant variations in temperature for any functional defects or damage between the different areas can cause caused by inadequate ducting. -
Page 36: Electrical Connection
CSA C22.1-12, appliance to your power supply, Canadian Electrical Code, Part I. please consult a licensed electrician or call Miele’s Technical Service Department. WARNING: THIS APPLIANCE MUST BE GROUNDED... -
Page 37: Activating Con@Ctivity 2.0
Activating Con@ctivity 2.0 Activating the ventilation hood Installation of the Con@ctivity 2.0 stick The cooktop and ventilation hood must be turned off. In order for you to be able to use the Con@ctivity 2.0 function, the cooktop Press and hold the delayed shutdown must be equipped with a Con@ctivity button 515 for approx. -
Page 38: Activating The Cooktop
Activating Con@ctivity 2.0 Activating the cooktop Activation failed While the ventilation hood is If a wireless connection cannot be searching for a wireless connection, established despite activation of the start activation on the cooktop. Con@ctivity function on the ventilation More information can be found in the hood and cooktop, the function must operating instructions for the... -
Page 39: Customer Service
In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Customer Service. You can book a Miele Service Call online at www.miele.com/service. Contact information for Miele Customer Service can be found at the end of this document. -
Page 40: Technical Data
Technical data Fan motor 350 W Cooktop lighting 3 x 3 W Total connected load 359 W Voltage, Frequency 120 V AC, 60 Hz Fuse rating 15 A Power cord length 2.5 ft (0.75 m) Weight DA 6596 W 55 lbs (25 kg) DA 6526 W 61.6 lbs (28 kg) Optional accessories for recirculation mode DUW 20 conversion kit and DKF 12-900 charcoal filter Contains FCC ID: 2ACUWEI8800... - Page 43 Customer Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Headquarters and Miele Centre Princeton, NJ 08540 161 Four Valley Drive www.mieleusa.com Vaughan, ON L4K 4V8 www.miele.ca Customer Support Phone: 888-99-MIELE (64353) Customer Care Centre info@mieleusa.com...
- Page 44 DA 6596 W, DA 6526 W en-US M.-Nr. 12 253 840 / 00...
Need help?
Do you have a question about the DA6596WSS and is the answer not in the manual?
Questions and answers