Ascii rs-232 controlled usb keyboard and mouse cable (20 pages)
Summary of Contents for Hagstrom Electronics KE-XTUSB
Page 1
KE-XTUSB XT and AT Keyboard to USB Keyboard Protocol Converter User Manual...
Page 2
Please take a few minutes to read this manual before using your KE-XTUSB. If you have any questions about the use of the KE-XTUSB not covered in this manual, please contact us. Send an email to, sales@hagstromelectronics.com...
Page 3
CONTENTS Introduction to the KE-XTUSB Quick Setup KE-XTUSB Configuration Jumpers Notes on Operation KE-XTUSB Specifications Custom Options KE-XTUSB Connectors USB Port to From PS/2 or Computer XT Keyboard 5 PIN Adapter KE-XTUSB LED Indicators External Keyboard LED USB Status LED...
5 pin DIN adapter from the unit and plug the keyboard directly into the miniDIN on the KE-XTUSB. 3) Connect the USB cable included with the unit to the KE-XTUSB and then to a USB port on the target computer. Use a USB port directly on the computer or a USB connector on a self powered USB hub.
Since the unit is also powering the keyboard, and the vintage keyboards can have significant current requirements, the KE-XTUSB must be connected to a direct USB port on the PC, or a self powered USB Hub. The unit should not be connected to a bus powered USB Hub.
Page 6
Custom KE-XTUSB Options We offer custom and special modifications to our standard KE-XTUSB unit to conform to your exact specifications. Please contact us if you have special requirements. Questions or Comments? Please send us an email! or visit our website www.hagstromelectronics.com...
Depending on the state in which you live, you may have additional rights. Great care has been taken during the assembly, testing, and burn-in of your KE-XTUSB to ensure its performance. If you have any questions, please send us an email.
Need help?
Do you have a question about the KE-XTUSB and is the answer not in the manual?
Questions and answers