KIESELMANN GmbH Table of Contents T a b l e o f C o n t e n t s 1 General informations .............................. 4 Informations for your safety ............................... 4 Marking of security instructions............................ 4 General designated use .............................. 4 Personnel .....................................
In addition, you will also find all neces- sary instructions and spare part data for maintenance in this instruction manual. If you don't want to carry out the maintenance by yourself, our KIESELMANN - service team will naturally be at your dis- posal.
KIESELMANN GmbH | Operating Instructions General informations | 1 1.5 Modifications, spare parts, accessories Unauthorized modifications, additions or conversions which affect the safety of the fitting are not permitted. Safety devices must not be bypassed, removed or made inactive. Only use original spare parts and accessories recommended by the manufacturer.
2 | Safety instructions Operating Instructions | KIESELMANN GmbH 2 S a f e t y i n s t r u c t i o n s 2.1 Intended use Dirt trap is applicated for the separation of solid matters in liquids, in plants of the food and beverage industry.
KIESELMANN GmbH | Operating Instructions Function and operation | 3 3 F u n c t i o n a n d o p e r a t i o n 3.1 Description of function The dirt trap is used to filter solid matter in liquids. When the liquid flows through the strainer in the direction of the arrow (see figure), the solid matter is retained in the mesh bottom.
4 | Technical data Operating Instructions | KIESELMANN GmbH 4 T e c h n i c a l d a t a Model Dirt trap Size DN25 - DN150 Connection type • Weld-on end DIN EN 10357 • Male part DIN11851 •...
KIESELMANN GmbH | Operating Instructions Drawings and dimensions | 6 6.2 Connection variants S - S G - G KM - G G - KM DN25 - DN100 S - S G - G KM - G G - KM DN125 - DN150 6.3 Dimensions...
7 | Wearing parts list Operating Instructions | KIESELMANN GmbH 7 W e a r i n g p a r t s l i s t Wear parts set EPDM 7023 DN 990-054 Nominal size O-ring [D1] O-ring [D2]...
Need help?
Do you have a question about the 7023 and is the answer not in the manual?
Questions and answers