Connecting the power and network cables, • Locating optional ports on the appliance, and • Powering on your x360Recover (formerly Replibit) appliance. If you encounter problems during the setup process, contact Axcient support using one of the following methods: • Phone: 1 (800) 715-2339 •...
The power supply is an external power brick, so there’s no need to adjust switches. Optionally, connect the x360Recover appliance to a monitor using a VGA cable (sold separately). You can then use the monitor to temporarily validate a successful boot and the IP address.
STEP 3: Power on the appliance Open the appliance and press the power button to turn on the appliance. The x360Recover backup software is pre-installed on the BDR appliance and will automatically launch once fully booted. Most x360Recover appliances will also automatically obtain an IP address through DHCP.
With two 2TB SSD drives, what is the total useable storage for this model? The intent with this unit is to provide reliable BDR services with redundant storage, so the 2TB would have its drives mirrored to provide 2 ‘TB’ of storage. In Axcient parlance, this equates to about 1.5TiB of usable storage.
Need help?
Do you have a question about the X360Recover and is the answer not in the manual?
Questions and answers