Summary of Contents for Hall Technologies HT-HVMT24-PI
- Page 1 Hall Technologies • 1234 Lakeshore Dr Suite #150 Coppell, TX 75019 • halltechav.com HT-HVMT24-PI 24” Medical Touch Monitor with Raspberry Pi ALPHA SAMPLE – QUICK SETUP GUIDE February 14, 2025 Hall Technologies February 14, 2025 Page 1 of 5...
- Page 2 Remove 4 screws to access the Raspberry Pi module. (The current cover is a bit tight – if you press down to the left of the cover and slide a small flathead screwdriver in, you should be able to lift it out.) Hall Technologies February 14, 2025...
- Page 3 USB Type-B Input – using the included USB Type-B to Type-A short cable, connect this USB 2 to a port on the Raspberry Pi. Press button above this input to pair the touch feature to the monitor. Hall Technologies February 14, 2025 Page 3 of 5...
-
Page 4: Remote Control
REMOTE CONTROL Use this remote to toggle between the two different HDMI inputs – one for the Nurse’s PC and one for the Raspberry Pi – by pressing the HDMI button. Hall Technologies February 14, 2025 Page 4 of 5... - Page 5 © Copyright 2023. Hall Technologies All rights reserved. 1234 Lakeshore Drive, Suite #150, Coppell, TX 75019 halltechav.com / support@halltechav.com (714)641-6607 Hall Technologies February 14, 2025 Page 5 of 5...
Need help?
Do you have a question about the HT-HVMT24-PI and is the answer not in the manual?
Questions and answers