1 General Information The lix.pure SLC sensor is supplied with 24 VDC via the Zhaga connector and may never be connected to the 230 VAC mains under any circumstances. Make sure that the sensor is correctly mounted and locked. The manufacturer accepts no liability for damage caused by improper use.
Page 3
Figure 1: lix.pure SLC luminaire mounting Detection Range of the Sensor The lix.pure SLC sensor is equipped with a radar sensor that looks down onto the road in front of the light point. Figure 2: lix.pure SLC detection area lix.pure SLC_User Manual_EN_1.0.docx...
Page 4
3 Status-LED The lix.pure SLC sensor has a red status LED that is visible to the user. It will light up when an object is detected. 4 Configuration of the Sensor The lix.pure SLC sensor can be configured using the esave slConfigurator app. After...
Page 5
Figure 4: lix.pure SLC configuration Approach Sensitivity / Leave Sensitivity: The proximity and range sensitivity of the radar sensor can be adjusted independently of each other. The more sensitive a sensor is set, the greater the range, but also the greater the possibility of potential false alarms.
Need help?
Do you have a question about the lix.pure SLC and is the answer not in the manual?
Questions and answers