NewLine STV+ Installation Manual

Dear customer: Before installation, please read the installation instructions carefully.
Product damage caused by personal actions is not covered by the warranty.
If there are any problems encountered during the installation process or if the after-sales
department needs to come on-site for installation, please contact us.
Do not press the screen
with your hands
(approx. 8.2021-14.7638 ft)
Part list:
Machine bracket X� Wall bracket X�
Expansion
Wood grain
plug X��
screw X��
Pad X� M� screw X�
STV+ 115" Wall Mounting Bracket
Installation Guide
200mm
（horizontal direction）
200MM
To install the bracket properly, please read the installation guide carefully.
Please ask authorized installation company to install the bracket.
If you are not clear with the installation guide, please contact us.
The illustrations in this manual are for reference only, please refer to the actual product.
screen
1.Take out four machine brackets and use the M8 screws that come with this bracket to fix
the complete machine brackets into the four VESA holes near the top of the screen, ensuring
that the installation height of the four brackets is the same and that the complete machine
brackets are securely locked to the screen.
8mm
(0.314961 inches)
M8 screw
Fix the entire
machine bracket
with screws
installed through the
middle hole.
115"
SCREEN
115
(220.462 lbs)
115
During installation,
the arrow points upwards towards the screen.
Attention:
The whole machine bracket should be fixed to
the whole machine as neatly as possible, and
the example of whether it is installed in place is
as follows:
100KG