Download Print this page

MOBB Health Care MHRTS2-MB Manual

2" raised toilet seat w/new handles

Advertisement

Quick Links

Lifetime Limited Warranty
If you have a question about your MOBB
Healthcare device or this warranty, please
contact an authorized MOBB Healthcare dealer.
MOBB Healthcare warrants to the original
consumer purchaser for as long as they own
their MOBB product that it will be free from
defects in material and workmanship under
normal use. This warranty is only applicable to
products used in residential applications within
the United States and Canada and is not
transferable to subsequent owners. Should
defects in material or workmanship exist during
the applicable warranty period in any MOBB
Healthcare Product, MOBB Healthcare will elect
at its discretion to either repair or replace the
defective material. This warranty covers only
parts and materials of the products supplied by
MOBB Healthcare. Not covered under this
warranty are wear and tear items or abuse of
the product in a manner that was not intended
for the product to be used. This warranty shall
become void if the product is in any way
modified, improperly adjusted or abused.
Regular
MHRTS2-MB
Elongated
MHERTS2-MB
2" Raised Toilet Seat
w/new Handles
Weight Capacity 300 lbs
MOBB Healthcare Ltd.
116A Viceroy Rd. Unit 5-6
Concord, Ontario, Canada
L4K 2M1
www.mobbhhc.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the MHRTS2-MB and is the answer not in the manual?

Questions and answers

Summary of Contents for MOBB Health Care MHRTS2-MB

  • Page 1 This warranty shall become void if the product is in any way modified, improperly adjusted or abused. Regular MHRTS2-MB Weight Capacity 300 lbs MOBB Healthcare Ltd. Elongated MHERTS2-MB 116A Viceroy Rd.
  • Page 2 ASSEMBLY and INSTALLATION Remove all parts from the box • One Seat Riser, two rest arms, two mounting screws, two plastic washers, two metal washers, and two wing nuts. MOUNTING SCREWS METAL WAHSERS Left Right PLASTIC WAHSERS WING NUTS 2. Insert the arm into the seat riser as illustrated in the diagrams: Push...
  • Page 3 ASSEMBLY and INSTALLATION 3. Remove the existing toilet seat and lid from the toilet frame by unscrewing the seat screws located at the rear of the toilet seat. 4. Place the seat riser on the toilet frame and align the mounting holes. 5.

This manual is also suitable for:

Mherts2-mbMhrts2Mherts2