Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Logic IO Manuals
  4. Control Unit
  5. RT-EX-9043D
  6. Technical manual

Logic IO RT-EX-9043D Technical Manual

15 x digital output
Hide thumbs

Advertisement

Quick Links

Download this manual
Technical Manual for
RT-EX-9043D
Version 2.03
15 x Digital Output

Advertisement

loading
Need help?

Need help?

Do you have a question about the RT-EX-9043D and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Logic IO RT-EX-9043D

  • Page 1 Technical Manual for RT-EX-9043D Version 2.03 15 x Digital Output...

  • Page 2: Introduction

    Technical Manual, RT-EX-9043D, v2.03 Introduction The EX9043D MODBUS I/O Expansion module is a high-quality and low-cost add-on data acquisition device that allows expanding the on-board digital output capabilities on X32-based RTCU units almost indefinitely and completely transparent using MODBUS communication protocol.

  • Page 3: Table Of Contents

    Technical Manual, RT-EX-9043D, v2.03 Table of Contents Introduction ..............................2 Table of Contents ............................3 Graphical view ............................... 3 Pin Assignment .............................. 3 Default Settings ............................5 LED Indicator ............................5 INIT Operation (Configuration mode) ......................6 Wire Connections ............................7 Digital Outputs: ............................
  • Page 4 Technical Manual, RT-EX-9043D, v2.03 Name Description DO10 Digital output 10 DO11 Digital output 11 DO12 Digital output 12 DO13 Digital output 13 DO14 Digital output 14 INIT* Pin for initialization of the configuration routine (Y) DATA+ RS485+ data signal (G) DATA-...

  • Page 5: Default Settings

    Technical Manual, RT-EX-9043D, v2.03 Name Description Digital output 5 Digital output 6 Digital output 7 Digital output 8 Digital output 9 Please refer to the section “Wire Connections” for correct wiring to the external device/sensor. Default Settings Name Description Baud rate...

  • Page 6: Init Operation (Configuration Mode)

    Technical Manual, RT-EX-9043D, v2.03 INIT Operation (Configuration mode) The module has a build-in EEPROM to store configuration information such as address, type, baud rate and other information. Sometimes a user may forget the configuration of the module, or simply need to change it.

  • Page 7: Wire Connections

    Technical Manual, RT-EX-9043D, v2.03 Wire Connections Digital Outputs: When connecting a device to the digital outputs please follow the wiring scheme below: DO14 Please note that when connecting inductive load to the digital outputs a diode needed to prevent counter EMF.

  • Page 8: Appendix A - Using The Module As I/O Extension In The Rtcu Ide

    Technical Manual, RT-EX-9043D, v2.03 Appendix A – Using the module as I/O extension in the RTCU IDE To be able to use the MODBUS I/O Expansion module as an I/O extension, the RTCU IDE project needs to be configured correctly, by entering the correct parameters for the expansion module into the “I/O Extension device”...