AEG LR9W80609 User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer
  5. LR9W80609
  6. User manual
AEG LR9W80609 User Manual

AEG LR9W80609 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
aeg.com/register
EN User Manual | Washing Machine
LR9W80609
aeg.com\register

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LR9W80609 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for AEG LR9W80609

Summary of Contents for AEG LR9W80609

  • Page 1 EN User Manual | Washing Machine LR9W80609 aeg.com\register...

  • Page 2: Table Of Contents

    Welcome to AEG! Thank you for choosing our appliance. Get usage advice, brochures, trouble shooter, service and repair information: www.aeg.com/support Subject to change without notice. CONTENTS 1. SAFETY INFORMATION................3 2. SAFETY INSTRUCTIONS................5 3. PRODUCT DESCRIPTION................7 4. TECHNICAL DATA..................9 5.

  • Page 3: Safety Information

    SAFETY INFORMATION Before beginning the installation and use of this appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

  • Page 4: General Safety

    1.2 General Safety • This appliance is for washing domestic-type, machine- washable laundry only. • This appliance is designed for single household domestic use in an indoor environment. • This appliance may be used in, offices, hotel guest rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels.

  • Page 5: Safety Instructions

    2. SAFETY INSTRUCTIONS 2.1 Installation • WARNING: This appliance is designed to be installed / connected to a grounding connection in the building. • Always use a correctly installed The installation must comply with shockproof socket. relevant national regulations. • Make sure that the parameters on the rating plate are compatible with the •...

  • Page 6: Internal Lighting

    • Make sure that there is access to the tap discontinued: motor and motor brushes, after the installation. transmission between motor and drum, pumps, shock absorbers and springs, 2.4 Use washing drum, drum spider and related ball bearings, heaters and heating elements, including heat pumps, piping WARNING! and related equipment including hoses,...

  • Page 7: Product Description

    To regenerate the resins and • The AEG Steam Fragrance, thanks to the make them ready to soften the water pour steam programmes offers the perfect Salt...

  • Page 8: Appliance Overview

    3.2 Appliance overview 12 13 Worktop Feet for levelling the appliance Detergent dispenser and salt Drain hose compartment Inlet hose connection Control panel Mains cable Door handle Transit bolts Internal light Hose support Rating plate Drain pump filter The rating plate reports: QR code Mod.

  • Page 9: Technical Data

    Compartment for salt. Salt Read carefully 'The Water Softener technology (Soft Water)'. Salt refilling when required by the appliance maintains the Soft Water efficient. Salt Maximum level for detergent/additives quantity. Compartment for washing phase: powder detergent, stain remover. When selecting a prewash phase, put the detergent/additive in a dosing ball inside the drum.

  • Page 10: Installation

    5. INSTALLATION WARNING! Refer to Safety chapters. 5.1 Unpacking WARNING! Remove all the packaging and the transit bolts before installing the appliance. 4. Open the door and remove the WARNING! polystyrene piece from the door seal and Use the gloves. all the items from the drum.

  • Page 11: Positioning And Levelling

    8. Pull up the appliance in vertical position. 11. Pull out the plastic spacers. 12. Put the plastic caps, that you find in the user manual bag, in the holes. 9. Remove the power supply cable and the drain hose from the hose holders. We recommend that you keep the packaging and the transit bolts for any It is possible to see water flowing...

  • Page 12: The Inlet Hose

    5.3 Fixing plate kit If you install the appliance on a plinth that is not an accessory supplied by AEG, secure the appliance with the fixing plates. This spare part is available in web shop or from authorised dealer.
  • Page 13 not be assembled on the appliance. 1. Connect the water inlet hose to the back 5. Connect the inlet hose to the valve. Make of the appliance. sure to tight the ring nut to prevent leaks. 2. Position it toward left or right depending on the position of the tap.

  • Page 14: Water-Stop Device

    5.5 Water-stop device If this occurs, close the water tap and contact the authorized service centre to replace the The inlet hose has a water stop device. This hose. device prevents water leaks in the hose because of its natural ageing. 5.6 Water drainage The red sector in the window «A»...

  • Page 15: Control Panel

    required, also taking into account any other appliances in use. Make sure that the plastic guide cannot Connect the appliance to an earthed move when the appliance drains and the socket. drain hose end is not immersed in the water. There may be a return of dirty water into the appliance.
  • Page 16 The options are not selectable with all washing programmes. Check the compatibility between options and washing programmes in the "Options compatibility with programmes" paragraph in the "Programmes" chapter. An option can exclude another one, in this case the appliance doesn't allow you to set the incompatible options together. Make sure the screen and touch buttons are always clean and dry.
  • Page 17 Add garments indicator: it lights on when the programme starts and the user can still pause the appliance and add more laundry. Extra Rinse indicator. ProSense indicator. Finish In indicator. The digital indicator can show: • Programme duration (e. g. The time shown when the programme is set could not correspond to effective duration and change after ProSense phase.

  • Page 18: Dial And Buttons

    Rinse hold indicator. Pre-wash indicator. Stain indicator. 7. DIAL AND BUTTONS 7.1 On/Off 7.4 Introduction Pressing this button for a few seconds allows to activate or deactivate the appliance. Two different tunes sound while switching the The options/functions are not selectable appliance on or off.

  • Page 19: Plus Steam

    the display: to reset the Network For this reason, the programme maximum Credentials. load combined with this option is 2 kg (approximately 8 - 10 shirts). 7.7 Finish In When setting the Plus Steam option, the maximum load drops to 2 kg in the display and programme time is adjusted accordingly.
  • Page 20 7.11 Time Save 7.13 Spin With this option you can decrease the When you set a programme, the appliance programme duration. automatically selects the default spin speed. • If your laundry is normally or lightly soiled, Touch this button repeatedly to: it may be advisable to shorten the washing •...

  • Page 21: Settings

    more water for some washing Touch this button repeatedly until the desired programmes temperature value appears on the display. When the display shows the indicators , the appliance does not heat the The appliance empties the water out water. automatically after approximately 18 hours.

  • Page 22: Factory Defaults

    4. To exit this mode, press any button or 1. Switch the appliance on by pressing switch the appliance off by means of On/Off button. theOn/Off button. 2. Press and hold the Stains/Prewash and Time Save buttons for some seconds. 3.

  • Page 23: How To Deactivate The Water Softener

    10.2 How to set the water hardness 4. Touch repeatedly the Spin button until the level desired level appears (from C01 to C07). 5. Touch the Start/Pause button to confirm The appliance allows you to chose between 7 your choice and exit the menu. levels corresponding to 7 different ranges of How to set the water softener also water hardness.
  • Page 24 Levels Water hardness range °f °d °e (French de‐ (German de‐ (English de‐ mmol/l grees) grees) grees) 6 - 13 4 - 7 5 - 9 0.6 - 1.3 60 - 130 14 - 21 8 - 11 10 -15 1.4 - 2.1 140 - 210 22 - 29...

  • Page 25: Water Softener Regeneration

    10.4 Water softener regeneration WARNING! After a few cycles, the appliance may need to Salt regenerate the water softener. Pour the salt in the compartment only. The regeneration process is automatically ensured when running programmes such as WARNING! Cottons and Synthetics routinely even if the Do not put anything but salt in the programme duration is reduced by tapping Salt...

  • Page 26: Programmes

    11.1 My AEG Care app and additional hidden programmes My AEG Care app provides you with a wide choice of additional hidden programmes. Connect the appliance to My AEG Care and you will be able to choose the programme that suits your needs most.
  • Page 27 Programme Programme description Machine washable wool, hand washable wool and other fabrics with «hand washing» care symbol Wool Cotton and synthetic items lightly soiled or worn only once. 20min 3kg Cotton, synthetic and mixed items. Special steam cycle without washing that can be used to prepare your dried laundry for ironing or refreshing garments Steam worn once.
  • Page 28 Programme Programme description To spin the laundry and to drain the water in the drum. All fabrics, except wool‐ lens and delicate fabrics. Spin/Drain During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the drum doesn't rotate or doesn't rotate properly, but this is normal for this programme.
  • Page 29 Fragrance) The Steam programmes can be used for reducing wrinkles and odours on garments The AEG Steam Fragrance allows you to (such as cottons, synthetics, mixed fabrics, refresh even your delicate clothes, removing including delicates) that just need to be wrinkles and adding freshness with a gentle refreshed, in a short time, avoiding washing.
  • Page 30 11.4 Woolmark Wool Care - Green The wool wash cycle of this machine has been approved by The Woolmark Company for the washing of wool gar‐ ments labelled as «hand wash» provided that the prod‐ ucts are washed according to the instructions on the gar‐ ment label and those issued by the manufacturer of this washing machine.

  • Page 31: Wi-Fi - Connectivity Setup

    ■ ■ ■ ■ Plus Steam Finish In ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ If you set the No Spin option, the appliance performs draining only. This option is not available with temperature lower than 40 °C. If you set the shortest duration, we recommend that you decrease the load size.
  • Page 32 • Mobile device connected to wireless AEG Care network. Frequency 2.412 - 2.472 GHz for Eu‐ ropean market My AEG Care allows you to control your Protocol IEEE 802.11b/g/n laundry through a mobile device. It contains a large number of Max Power <20 dBm...

  • Page 33: Remote Start

    The access point will be open for about 3 The Remote Control activates minutes. automatically when you press the Start/ 5. Configure the My AEG Care app on your Pause button to start the programme, smart device and follow the instructions to...

  • Page 34: Over-The-Air Update

    If a programme is running, the App notifies that the update will start at the end of the programme. During the update, the appliance shows in the display. Do not switch off or unplug the appliance during update. The appliance will usable again at the end of 2.

  • Page 35: Filling The Detergent And Additives

    3. If desired, pour the fabric softener in the compartment CAUTION! Make sure that no laundry stays between the seal and the door. There is a risk of water leakage or damage to the laundry. CAUTION! Washing heavily oiled, greasy stains could cause damage rubber parts of the appliance.

  • Page 36: Starting A Programme With The Finish In Option

    13.5 Starting a programme Touch the Start/Pause button to start the programme. The related indicator stops flashing and stays In the display, the indicator of the operating phase starts flashing. The programme starts, the door is locked. The display shows the indicator 2.

  • Page 37: Programme Phase Indicators

    1. The appliance detects the load in the first 30 seconds: the indicator flashes, the The ProSense is not available with some bars under the icon move back programmes, such as Wool, programmes and forth and the drum rotates shortly. with short cycles and without washing 2.

  • Page 38: Opening The Door - Adding Garments

    The indicator of the Start/Pause button goes off. If the ProSense phase is already carried out and the water filling is already The door unlocks and the indicator goes started, the new programme starts off. without repeating the ProSense phase. 1.

  • Page 39: Stand-By Option

    3. When the programme is completed and • After 5 minutes from the end of the washing programme the door locked indicator goes off, Press the On/Off button to activate the you can open the door. appliance again. 4. Press the On/Off button a few seconds to The display shows the end of the last set deactivate the appliance.

  • Page 40: Stubborn Stains

    • The choice and quantity of detergent will depend on: type of fabric (delicates, woollens, cottons, etc), the colour of clothes, size of the load, degree of soiling, wash temperature and hardness of the water used. • Follow the instructions that you find on packaging of the detergents or other treatments without exceeding the indicated maximum level (...

  • Page 41: Care And Cleaning

    14.5 Water hardness To find out the water hardness in your area, contact your local water authority. If the water in your area is hard or medium Use the correct quantity of water softener. hard, we recommend that you use a water Follow the instructions that you find on the softener for washing machines.

  • Page 42: Maintenance Wash

    15.7 Cleaning the drum The regular detergents already contain water softening agents, but we recommend to run a Regularly examine the drum to prevent cycle with empty drum and a descaling unwanted deposits. product occasionally. Rust deposits in the drum may occur due to rusting foreign body in the washing or tap water containing iron Always follow the instructions that you...
  • Page 43 15.8 Cleaning the detergent dispenser and the salt compartment Before cleaning, make sure that the all compartments are empty. To prevent possible deposits of dried detergent, clotted fabric softener, formation of mould in the dispenser drawer and/or salt fouling in the salt compartment, once in a while carry out the following cleaning 3.

  • Page 44: Cleaning The Drain Pump

    WARNING! • Do not remove the filter while the appliance operates. • Do not clean the pump if the water in the appliance is hot. Wait until the water cools down Proceed as follows to clean the pump: 1. Open the pump cover. 6.
  • Page 45 11. Put the filter back into the special guides by turning it clockwise. Make sure that you tighten the filter correctly to prevent leakages. 5. When the bowl is full of water, turn the filter back and empty the container. 6.

  • Page 46: Cleaning The Inlet Hose And The Valve Filter

    15.10 Cleaning the inlet hose and the valve filter It is recommended to clean both the filters of the inlet hose and valve occasionally to remove any deposit, collected over the time: 1. Remove the inlet hose from the tap and clean the filter.

  • Page 47: Troubleshooting

    16. TROUBLESHOOTING WARNING! Refer to Safety chapters. 16.1 Alarm Codes and Possible failures The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the tables). WARNING! Deactivate the appliance before carrying out any check. With some problems, the display shows an alarm code and the Start/ Pause button may flash continuously:...
  • Page 48 • Make sure that the sink spigot is not clogged. • Make sure that the drain hose has no kinks or bends. The appliance does not • Make sure that the drain filter is not clogged. Clean the filter, if necessary. Re‐ drain the water.
  • Page 49 Problem Possible solution • Make sure that the couplings of the water hoses are tight and there is not wa‐ ter leakages. There is water on the floor. • Make sure that the water inlet hose and the drain hose have no damages. •...

  • Page 50: Emergency Door Opening

    Problem Possible solution • The ProSense System is able to adjust the programme duration according to The programme duration in‐ creases or decreases during the type and the laundry load size. Refer to "The ProSense System load de‐ programme execution. tection"...

  • Page 51: Consumption Values

    2. Disconnect the mains plug from the If this happens, please proceed as follows: mains socket. 1. Pull the drawer out. 3. Open the filter flap. 4. Pull the emergency unlock trigger downward once. Pull it downward once again, keep it tensed and, in the meanwhile, open the appliance door.
  • Page 52 17.2 Legend Laundry load. hh:mm Programme duration. Energy consumption. °C Temperature in the laundry. Litres Water consumption. Spin speed. Remaining moisture at the end of spinning phase. The higher is the spin speed, the higher is the noise and the lower is the remaining moisture. Values and programme duration may differ depending on different conditions (e.g.

  • Page 53: Quick Guide

    Programme rpm 1) Litres hh:mm °C Cottons 10.0 2.150 85.0 03:35 44.00 85.0 1600 95°C Cottons 10.0 1.550 80.0 03:50 44.00 55.0 1600 60°C Cottons 10.0 0.350 80.0 03:10 44.00 20.0 1600 20°C Synthetics 0.800 50.0 02:25 35.00 40.0 1200 40°C Delicates 0.300...

  • Page 54: Cleaning The Drain Pump Filter

    18.2 Cleaning the drain pump filter 180˚ Clean the filter regularly and, especially, if the alarm code appears on the display. 18.3 Programmes Programmes Load Product description Cotton and synthetic items. This programme ensures a good 5.0 kg washing performance in a short time. AbsoluteWash 49min Low energy cycle for cottons.

  • Page 55: Environmental Concerns

    Programmes Load Product description To spin the laundry and to drain the water in the drum. All fab‐ 10.0 kg rics, except woollens and delicate fabrics. Spin/Drain Washing programme. Washing programme and waterproofing phase. Tested for Staphylococcus aureus, Enterococcus faecium, Candida albicans, Pseudomonas aeruginosa and MS2 Bacteriophage in external test performed by Swissatest Testmaterialien AG in 2021 (Test Report No.
  • Page 56 My AEG Care app The software in this product contains components that are based on free and open source software. AEG gratefully acknowledges the contributions of the open software and robotics communities to the development project. To access the source code of these free and open source software components whose license conditions require publishing, and to see their full copyright information and applicable license terms, please visit: http://aeg.opensoftwarerepository.com (folder NIUS)

Table of Contents