Bauhn APBMC2-0225-3 User Manual

Have you got everything?
Overload Circuit Breaker (Resettable)
1
Protects against current overload at 10 amp
Surge Protected LED Indicator
2
When lit, the green light indicates that all
connected devices are surge protected.
AC Sockets
3
All 3 sockets are the same protected sockets
and can be used interchangeably.
Power On/Off Switch
4
Press to supply/cut off power to the outlets.
When the LED is on, the socket is switched
on.
When the LED is off, the socket is switched
off.
Note: The USB A and USB C outputs are
always on.
USB-C and USB-A Charging Ports
5
For charging phones, tablets or other devices.
Detachable Desk Clamp
6
For mounting the power board on a desk with
a 15-50mm thickness.
Using The Detachable Desk Clamp
1. Position the desk clamp (B) on the edge of a table at
the desired location.
2. Twist the clamp lock (C) until the clamp stopper sits
clamp is secure and not loose.
3. To detach the desk clamp from the power board, use
a Philips head screwdriver (not included) to unscrew
the 2 Philips head screws (D) on the back of the
clamp to detach the clamp from the power board.
Troubleshooting
No power
output from
one of the
sockets
No power
output from
any of the
sockets
No output
from the USB
ports
Power board is
not turning on
W h a
O
Well done, you made it.
Now sit back and relax... Your power board is automatically
covered by a 1-year warranty.
How nice!
D
• Try other sockets. If the other sockets have power output, it's probably the
contact of one faulty socket that is loose or not connected; avoid using
that socket.
• Check that the power switch is turned on (you can try to turn it on and off
Indicator is lit green.
• Check the overload circuit breaker button to see whether it's tripping, push
it down to reset the circuit breaker.
• Make sure the input socket for the power board has power output.
• Check that the USB cable is connected securely to the USB port and/or try
a different USB port.
• The total output current for the USB ports are 4.5A. Remove devices using
the other USB ports.
• Use another USB cable.
• Check that there is no visible damage to the plug or cord.
•
(2400W, 10A). If exceeded, unplug the devices and press the overload
reset button.
? t Y o u m e a n h t s i U s r e G
We'd love to help you get up and running as quickly as possible.
Call our After Sales Support on 1300 002 534.
3 WAY DESK CLAMP POWER BOARD
WITH INDIVIDUAL SWITCH
Unpack the box and make sure all
of these items are there:
A. 3-Way Desk Clamp Power Board
with Individual Swtich
B. User Guide
Product Overview
1
2
5
A
D
C
Give us a call
u d i e d d i n t ' h a e v A L L h t
User Guide
Model: APBMC2-0225-3
Note: only one power board
(white/black) is supplied
You will need a Philips head
screwdriver (not included) to
detach the desk clamp from
the power board.
6
B
e a s n w r e ? s S p e k a o t u
.
! s