Download Print this page

Streetwize GW560 Assembly Instructions

Solar rattan effect stake lights (pack of 2)

Download this manual

GW560

Solar Rattan Effect Stake

Lights (Pack of 2)

Thank you for purchasing these Solar Rattan Effect Stake Lights from Streetwize Garden.

The instructions written below provide you with guidance on how to get the best use out of

the product. We highly recommend reading these instructions before using the product.

Need help?

Do you have a question about the GW560 and is the answer not in the manual?

Page 1 Solar Rattan Effect Stake Lights (Pack of 2) Thank you for purchasing these Solar Rattan Effect Stake Lights from Streetwize Garden. The instructions written below provide you with guidance on how to get the best use out of the product. We highly recommend reading these instructions before using the product.
Page 2 Assembly Instructions 1. Remove the protective film from the solar panels. 2. Push the ground stake into soft ground such as a flower/garden bed. Charging & Operation These solar stake lights come with a solar panel. During the day, the panel absorbs solar energy to charge the included rechargeable battery.
Page 3 Maintenance & Troubleshooting 1. Make sure the switch is set to the “ON” position. 2. Keep the solar panel clean. 3. If a solar product does not light up after it has been used for around 8 – 12 months, replace the rechargeable battery as it may be weak or worn out.
Page 4 Technical Specifications Product Name Solar Rattan Effect Stake Light Supplier Code GW560 Quantity Pack of 2 Battery AAA 1.2V 300mAh, Ni-MH rechargeable battery Size (H)36.5 x (W)10.5 x (D)11 cm Dancing Flame Effect Streetwize, Suite GA, Marsland House, Marsland Road, Sale M33 3AQ For Product Support: E: support@streetwize.co.uk...