Download Print this page

Encore EP-6550-24-S Assembly Instructions

Single face/foam/bubble dispenser with manual cutter - 24”- small disk

Download this manual

EP-6550-24-S

Single Face/Foam/Bubble Dispenser

with Manual Cutter - 24"- Small Disk

assembly instructions

IT IS THE RESPONSIBILITY OF THE CUSTOMER TO ENSURE THAT

ALL OPERATORS AND SERVICE PERSONNEL HAVE FULLY READ

AND UNDERSTOOD THIS DOCUMENT

READ ALL INSTRUCTIONS BEFORE OPERATING TOOLS.

FAILURE TO FOLLOW ANY OF THESE GUIDELINES COULD

RESULT IN SERIOUS OR FATAL INJURY

P (847) 735-8105 | F (847) 735-8297

sales@encorepack.com | www.encorepack.com

201 Park Avenue, Lake Villa, IL 60046

Made in the USA

P.O. Box 595, Winnetka, IL 60093

Edition 8/15/2024

Need help?

Do you have a question about the EP-6550-24-S and is the answer not in the manual?

Page 1 EP-6550-24-S Single Face/Foam/Bubble Dispenser with Manual Cutter - 24”- Small Disk assembly instructions IT IS THE RESPONSIBILITY OF THE CUSTOMER TO ENSURE THAT ALL OPERATORS AND SERVICE PERSONNEL HAVE FULLY READ AND UNDERSTOOD THIS DOCUMENT READ ALL INSTRUCTIONS BEFORE OPERATING TOOLS.
Page 2 2) Once the base frame is standing, lock the 5” casters in place. Wiggle the back frame into the base or services of Encore Packaging LLC, an Illinois limited liability company with a place of business at 201 Park frame and attach using 9/16” wrench (two), hex head bolts (two), flat washers (two outside back frame), Avenue, Lake Villa, IL 60046.
Page 3 ASSEMBLY INSTRUCTIONS Step 3 Step 4 Step 5 5) Once the top arm is firmly connected, hold bottom core (top) and “o” ring (bottom) in 4) To attach the top arm, place on top of back frame and screw in a hex head bolt with flat between the corrugated roll and against top arm.
Page 4 EP-6550-24-S PART LIST ITEM PART NUMBER DESCRIPTION QTY. E6550-01-24 Back Frame Assembly E6550-02 Base Frame Assembly E6550-02-F Leg Extension E6550-03-B Cotter Pin E6550-03-C Brake Arm Assembly E6550-04 Adjuster Assembly E6550-05 Top Arm E6550-08 Hinge Pin E6550-09-24 Extruded Rail E800-03 Bottom Core E800-04 "O"...
Page 5 P (847) 735-8105 | F (847) 735-8297 201 Park Avenue, Lake Villa, IL 60046 Made in the USA sales@encorepack.com | www.encorepack.com P.O. Box 595, Winnetka, IL 60093...