Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Lenovo ThinkVision E24q-30
Summary of Contents for Lenovo ThinkVision E24q-30
- Page 1 E24q-30&TS24q-30 Simplified service manual for dismantling Model Name: ThinkVision E24q-30&TS24q-30...
- Page 2 Exploded Diagram...
- Page 3 1. Precaution Please read the precaution as follows to prevent any damages to the LCD Monitor. Make sure all power connector is removed. Be sure that the LCD Monitor is in power off status. Prepare soft cloth and sponge as working platform to place LCD monitor horizontally.
- Page 4 2. Appropriate tools Select the Appropriate tools for disassembly and re-assembly. Phillips screwdriver (#2) Phillips screwdriver (#1) Gloves or soft cloth...
- Page 5 3. Disassembly SOP Put the monitor on a flat surface (Put the EPE on under the monitor) Remove 4pcs screws for remove the stand base Tool : Screwdriver #2 Use the C/D disassembly tool to release rear cover hook from disassemble hole on bottom Remove t Wedge your fingers between the rear cover and the...
- Page 6 Lift the rear cover up, then disconnect the function key cable and speaker cable, and then remove the rear cover Release the two speakers from the probers. Remove 1pcs tape and release the speaker’s cable from the hooks of the rear cover Tear off all tape, and release the key board by removing...
- Page 7 Disconnect the LVDS cable and panel lamp cable. Lift up the bracket and put it aside Remove all screws for unlocking middle bezel. Tool: Screwdriver #2 Disassemble the middle bezel with the panel module Release the keypad PCB from the middle frame...
- Page 8 Remove the Mylar tape Remove 4pcs screws for unlocking all PCB boards. Release the lamp cable from hook of bracket. Tool: Screwdriver #2 Take out PCB and peel off all mylar. Take out the thermal pads from power PCB...
Need help?
Do you have a question about the ThinkVision E24q-30 and is the answer not in the manual?
Questions and answers