Safety Warnings Parts List Thank you for choosing Obaby. This wardrobe conforms to BS EN 14749:2016. To Thank you for choosing Obaby. This wardrobe conforms to BS EN 14749:2016. To ensure that your wardrobe is used in accordance with these instructions, please read ensure that your wardrobe is used in accordance with these instructions, please read them fully.
Page 3
Parts check list Assembly Assembly Step 1 x 22 x 22 x 16 x 32 30mm x 18 Step 2 Wall Safety Pack 22mm additional tools required (not included) additional tools required (not included) www.obaby.co.uk www.obaby.co.uk www.obaby.co.uk www.obaby.co.uk obaby.co.uk obaby.co.uk www.obaby.co.uk...
Page 5
Always ensure the wall to be drilled is free from hidden electrical wires, water and gas pipes. Step 13 WALL To prevent tipping, use wall safety pack to attach back of wardrobe to the wall. Single Wardrobe Product Label R1-0-Taupe Grey.indd 19/05/2017 11:53 www.obaby.co.uk www.obaby.co.uk www.obaby.co.uk...
Page 6
Attachment device(s) are provided with your product, however you will need to source suitable fixings for your wall type. If in doubt, please consult a qualified tradesperson. Always ensure the wall to be drilled is free from hidden electrical wires, water and gas pipes. www.obaby.co.uk www.obaby.co.uk www.obaby.co.uk obaby.co.uk obaby.co.uk...
Need help?
Do you have a question about the Single Wardrobe and is the answer not in the manual?
Questions and answers