Do you have a question about the Heatflow DF2ESL and is the answer not in the manual?
Questions and answers
Summary of Contents for Consort Heatflow DF2ESL
Page 1
Company reserve the right to vary specifications from time to time without notice. USTOMER ELPLINE Should you need any advice on the use of your new Consort product please contact our Helpline: Consort Equipment Products Limited Thornton Industrial Estate, Milford Haven, Pembrokeshire, SA73 2RT Tel: 01646 692172 Fax: 01646 695195 Email: technical@consortepl.com Web: www.consortepl.com...
Please read this guide carefully and retain for future use and maintenance purposes. DF2ESL Installation and User Guide Warnings ence or knowledge unless they have Do NOT install the heater di- been given instruction concerning • use of the appliance by a person re- rectly above a power outlet.
Please read this guide carefully and retain for future use and maintenance purposes. DF2ESL Installation and User Guide Installation The heater must be wall mounted at minimum height of 1m from the floor. For the best performance the heater should be mounted at 1.8m from the floor.
Please read this guide carefully and retain for future use and maintenance purposes. DF2ESL Installation and User Guide Operation Overview Electrical Connections Electrical installation should be car- This heater will not work ried out by a competent installer in without a controller. accordance with the latest edition of the IEE Wiring Regulations, (BS.7671), The heater has an option of using a...
Please read this guide carefully and retain for future use and maintenance purposes. DF2ESL Installation and User Guide Basic Operation Bypassing Thermostat mode The DF2ESL has a power button for In order to bypass thermostat mode, turning the heater off, in a scenario of in other words to make the heater a having 2+ DF2ESL’s paired to the solely controller controlled device,...
Please read this guide carefully and retain for future use and maintenance purposes. DF2ESL Installation and User Guide Set up Menu 8 - Blank Press and hold MENU for 5 seconds. The display will enter the setup menu. Use + and - to change a value. 9 - Blank Use MENU to scroll between the set- tings.
Declaration Of Conformity In accordance with UK Government Guidance. E HEREBY CERTIFY THAT THE APPLIANCES DETAILED HEREON HAVE BEEN INSPECTED AND TESTED AND CONFORM TO THE REQUIREMENTS OF THE FOLLOWING UK STATUTORY INSTRUMENTS WHERE APPLICABLE Electrical Equipment (Safety) Regulations 2016 SI. 2016 1101 Electromagnetic Compatibility Regulations 2016 SI.
Need help?
Do you have a question about the Heatflow DF2ESL and is the answer not in the manual?
Questions and answers