Daheng Imaging MERCURY 2 MER2-U3 Series Quick Manual

MERCURY QuickGuide MERCURY QuickGuide
Thank you for choosing DAHENG IMAGING products! This
guide will help you get started as quickly as possible with our
products. For more information(e.g. detailed manuals, CAD/3D
drawings, driver software, etc.), please visit:
com/en.
China Daheng Group, Inc. Beijing Image Vision Technology Branch
Website: www.daheng-imaging.com/en
Sales Email: isales@daheng-imaging.com
Sales Tel: +86 10 8282 8878
Support Email: isupport@daheng-imaging.com
Usage
1) Do not install and operate the product in extreme environments with vibration, high temperature,
humidity, dust, strong magnetic fields, explosive/corrosive smoke or gases, as it may damage the camera,
cause a fire or electric shock.
2) Do not aim at the product with high intensity light sources directly, as it may damage the sensor.
3) If the device damaged, emits smoke, odor or noise, please turn off the power and unplug the power cord
immediately, and contact our technical support engineer.
4) Unauthorized disassembly, repair, or modification of products is prohibited as it may damage the camera
Warning
or cause a risk of electric shock.
5) In the use of the device, you must be in strict compliance with the electrical safety regulations of the
nation and region.
6) Please use the power supply provided by reputable manufacturers that meets the camera power limit
requirements, otherwise, it will damage the camera.
1) Check whether the device's package is in good condition, whether there is damage, deformation, etc.
before unpacking.
2) After unpacking, please carefully inspect the quantity and appearance of the product and accessories for
any abnormalities.
Caution
3) Please store and transport the product according to the specified storage and transportation conditions,
ensure that the storage temperature and humidity meet the requirements.
Personal Safety
1) It is strictly prohibited to perform device wiring, dismantling, maintenance and other operations while
powered on, otherwise there may be a risk of electric shock.
2) It is prohibited to touch the camera directly during using, otherwise there may be a risk of burns.
3) Please install and use the camera in accordance with regulations, otherwise there may be a risk of falling
and get injured.
Warning
4) The edges of the lens mount and fan are relatively sharp, so pay attention to the risk of scratches during
installation or use.
www.daheng-imaging.
I. Precautions
This guide applies to the following products:
MERCURY
■ ■
MER-U3(-L) Series
■ ■
MER-G(-P) Series
MERCURY2
■ ■ MER2-U3(-L) Series ■ ■
■ ■ ■ ■
MER2-G(-P) Series
■ ■ ■ ■
ME2P-U3 Series
■ ■ ■ ■
ME2P-G-P Series
MERCURY3
■ ■
MER3-G3-P Series
ME2S-U3 Series
ME2S-G-P Series
ME2C-G(-P) Series
ME2L-U3(-L) Series
1/4