Download
Share
Print this page
  1. Manuals
  2. Brands
  3. ATECH Manuals
  4. Security Sensors
  5. Fumis SweetSpot
  6. Manual

ATECH Fumis SweetSpot Manual

Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
SweetSpot (English)
•
General
•
Warnings
•
Recommendations
•
Warranty and general conditions
•
Technical characteristics
•
Use
o
Installation
Pairing
o
▪
▪
Unpairing
o
▪
▪
o
LED light color change
o
LED color codes
▪
▪
•
Troubleshooting
SweetSpot sensor
o
SweetSpot receiver
o
General
Thank you for choosing Fumis SweetSpot sensor by ATech elektronika d.o.o.
The SweetSpot wireless temperature sensor measures air temperature at its specific
location and sends this data to your heating appliance. This way your heating appliance
modulates its power according to the temperature at your chosen location.
ATTENTION:
•
Fumis SweetSpot sensor only works with heating appliances that use Fumis user
interfaces with integrated wireless connectivity or have SweetSpot receiver
module installed.
•
Before installing check if SweetSpot sensor is close enough for a heating
appliance to receive its wireless signal.
This manual consists of basic instructions for installing and operating the Fumis
SweetSpot sensor. It does not contain the operating instructions for your heating
appliance or the installation instructions for the SweetSpot receiver module.
Fumis user interfaces (with wireless connectivity)
Fumis SweetSpot receiver module
Fumis user interfaces (with wireless connectivity)
Fumis SweetSpot receiver module
SweetSpot sensor
SweetSpot receiver

Advertisement

loading
Need help?

Need help?

Do you have a question about the Fumis SweetSpot and is the answer not in the manual?

Questions and answers

Summary of Contents for ATECH Fumis SweetSpot

  • Page 1 This way your heating appliance modulates its power according to the temperature at your chosen location. ATTENTION: • Fumis SweetSpot sensor only works with heating appliances that use Fumis user interfaces with integrated wireless connectivity or have SweetSpot receiver module installed. •...
  • Page 2 Servicing: The Fumis SweetSpot sensor has been designed for long-life operation and does not require special maintenance (except replacing the batteries). However, in the case of malfunctions, ATech elektronika d.o.o. strongly recommends that you contact the authorized technician for your heating appliance or the person who installed it.

  • Page 3: Technical Characteristics

    ATech elektronika d.o.o. reserves the right to apply technical modifications without prior notice. ATech elektronika d.o.o. is not liable for malfunction and injuries that are a consequence of: external, chemical, and physical influences during transport, storage, installation, and use of Fumis products (for example, but not limited to: water leakage, exposure of the electronics to steam, exhaust fumes, ash, and temperatures outside the specified range).
  • Page 4 The SweetSpot sensor can be connected to Fumis interfaces (displays) with integrated wireless connectivity or to the Fumis SweetSpot receiver module. The SweetSpot sensor can be mounted horizontally (on a flat surface). Please use the included self-adhesive rubber pads. Vertical (wall) installation is also possible with the use of an included screw and the keyhole cutout on the bottom housing.
  • Page 5 On Premium XL display: enter settings menu -> external devices -> select a device -> click Disconnect. Fumis SweetSpot receiver module Press and hold the button on the SweetSpot receiver module for approx. 10 seconds until both LED lights (green and red) turn steady on. Release the button.
  • Page 6 Green Fast ON and PAIRING Powered up and searching for receiver in blinking pairing mode. Max. duration is 30 seconds. ON and PAIRED, Powered up with full battery capacity and color slow BATTERY OK paired with the receiver. The LED blinks blink every 180 sec.

  • Page 7: Troubleshooting

    Troubleshooting SweetSpot sensor Symptom Possible cause Solution No light from LED Missing or empty batteries, Check/replace the batteries light wrong battery polarity Contact Service (partially) defective LED light Hold the SweetSpot button to The ‘Glowing light’ feature is reenable the ‘glowing light function’...
  • Page 8 Wrong temperature on SweetSpot sensor is not Follow the connection your appliance connected to the receiver guide No connection to the The SweetSpot is too far away Move it closer and follow receiver from the receiver the connection guide Connection is lost SweetSpot is at its maximum Move the SweetSpot frequently...