Summary of Contents for Simac JOY-IT NODE MCU ESP32 USB-C
- Page 1 NODE MCU ESP32 USB-C Microcontroller development board Joy-IT powered by SIMAC Electronics GmbH - Pascalstr. 8 - 47506 Neukirchen-Vluyn - www.joy-it.net...
-
Page 2: General Information
1. GENERAL INFORMATION Dear customer, thank you for purchasing our product. In the following we will show you what you need to bear in mind when commissioning and using. Should you encounter any unexpected problems during use, please do not hesitate to contact us. -
Page 3: Installation Of The Module
4. INSTALLATION OF THE MODULE If you have not yet installed the Arduino IDE on your computer, download and install it first. If you have problems with the module driver later on, you can download the updated CP210x USB-UART drivers for your operating system here. After installing the development environment, you must add a new board administrator by following the steps below. - Page 4 Now got to Tools → Board → Board manager... Enter esp32 in the search field and install esp32 by Espressif Systems. The installation is now complete. You can now select the ESP32 Dev Module under Tools → Board. Attention! After the initial installation, the baud rate may have changed to 921600.
-
Page 5: Using The Module
4. USING THE MODULE Your NodeMCU ESP32 ready use. Sim- connect your computer with cable. installed board manager already provides many examples give quick insight into module. The examples can be found in your Arduino IDE under File → Examples→ ESP32. The quickest and easiest way to test your NodeMCU ESP32 is to retrieve the device number. - Page 6 Possibility of return at our company location during opening hours: SIMAC Electronics GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn Return option in your area: We will send you a parcel stamp with which you can return the device to us free of charge.
Need help?
Do you have a question about the JOY-IT NODE MCU ESP32 USB-C and is the answer not in the manual?
Questions and answers