Subscribe to Our Youtube Channel
Related Manuals for Micron IM4TS
Summary of Contents for Micron IM4TS
- Page 1 USER MANUAL Micron 7 Inch Touch Screen Monitor IM4TS Information & specifications contained in this manual maybe changed for the benefit of product development and improvements.
-
Page 2: Table Of Contents
Table of Contents 1. Features And Functions ..................2 2. Packing Contents ..................... 3 3. Name And Functions Of Each Part ................3 3.1 Front And Rear Part..................3 4. Connection Diagram ....................5 4.1 System Layout ....................5 4.2 Wiring Diagram ..................... 6 5. - Page 3 WARNING AND CAUTION Please make sure to follow the instructions to prevent any danger or property losses. Do not attempt disassemble or repair. This product requires a qualified technician Do not install the product in a hot or humid place Do not place heavy objects on the product Do not use solvents or detergents to clean the screen.
-
Page 4: Features And Functions
Do not remove the micro SD card (if Fitted) when recording, this generally will cause loss of data 1. Features And Functions • 7” capacitive touch screen monitor,1024*600 resolution • 1080P/720P/CVBS display & record. • GUI menu support sliding operation •... -
Page 5: Packing Contents
2. Packing Contents 3. Name And Functions Of Each Part 3.1 Front And Rear Part... - Page 6 Part Name Description Power Indicator White led when power on...
-
Page 7: Connection Diagram
Purple led when mute function enable Do-not-disturb/Leaving Purple led flashes when leaving mode Mode Indicator enable Green led flashes when have new Message Indicator image/video Micro SD Card Slot Socket for micro SD card Screen 7” digital touch screen Microphone Receive voice from the user Power Switch CCTV Input... -
Page 8: Wiring Diagram
4.2 Wiring Diagram Please be careful to wire as per the labelled terminals. »Intercom wiring diagram with one monitor. »Intercom wiring diagram with master monitor and sub monitors. - Page 9 »Wiring tpyes and distance...
-
Page 10: Installation
5. Installation »Monitor installation location Standard monitor installation height is about 1,500mm where screen center is at eye level; in this case, wall-hanging metal center is 1,450mm above ground level. »Wiring and installation of indoor monitor 1) Remove mounting bracket behind monitor and fix it on the wall with screw; 2) Pull the cable out and connect the system according to 4.2 wiring diagram;... -
Page 11: Operation Description
6. Operation Description 6.1 Main Screen Touch the screen anywhere in standby mode, the main page will be shown as follows: It will show corresponding functions when pressing each icon on main screen.It will also show main setting page when you slide the main page to the right or left. 6.2 Visitor Call When door station calls in, the visitor’s image will be shown on the monitor screen and you can press [Talk] icon to talk with the visitor and press it again to terminate... - Page 12 ※ Icon Definition capture a picture record a video switch between door stations talk and CCTV cameras release the electronic lock call transfer manually adjust display parameters(brightness/color/contrast) and volume open the automatic door back to main screen During the talk: •...
-
Page 13: Monitor Function
6.3 Monitor Function When you press the [Camera] icon on main screen, the system will enter monitor mode, and will show image from the corresponding door station and CCTV camera. Remark: • The [Transfer] icon will be disabled in monitor mode. 6.4 Multimedia 6.4.1 Image &... -
Page 14: Voicemail Function
6.4.3 Voicemail Function Press [Setting] icon on main screen and enter [Voicemail] setting page, press [For visitor] icon ,and then you can record and review messages. Remark: • The monitor support up to two voice messages for vistitor. When full, the newest message will automatically overwrite the oldest message. -
Page 15: Motion Detection
6.6 Motion Detection The monitor supports motion detection from door station or CCTV. You can enable/disable the motion detection function, set one camera as default for motion detection, set the sensitivity and frame rate and the time range of motion detection in [Motion detection] setting page. -
Page 16: Screensaver Function
6.8 Screensaver Function The monitor supports screensaver function (date &time display in standby mode).You can enable/disable screensaver function in [General] setting page. 6.10 Setting Page Press the [Setting] icon on main screen or slide the main page to the right or left,and then the screen will enter main setting page. - Page 17 • In [Time] setting page,you can set the date&time of the monitor and select the date format. • In [Mute] setting page,you can enable/disable the mute function and set the time range of do not disturb mode. • In [General] setting page,you can set the language of the monitor and restore system to factory settings (except date &...
-
Page 18: Specifications
address of different monitors in one network cannot be duplicated. Remark: • To record and review voicemail message, please see 6.4.3. • If you want to use voicemail function normally,you should make sure that the mode of monitor is “Leaving”. •...
Need help?
Do you have a question about the IM4TS and is the answer not in the manual?
Questions and answers