Advertisement
Quick Links
CAPRI BARBER CHAIR
ASSEMBLY MANUAL
MODEL NUMBER
LTX-BBCHR-72815
Thank you for purchasing our CAPRI barber chair by Berkeley.
It is designed to maximize the quality and comfort of your
work. The manufacturer shall not be liable for any injuries
caused by failing to follow the instructions in this manual.
PACKAGING CONTENTS
A. Backrest x 1
B. Seat cushion x 1
C. Chair seat frame with base x 1
D. Footrest x 1
A
C
Tools:
14mm open-end wrench x 1
17mm open-end wrench x 1
5cm Allen wrench x 1
6cm Allen wrench x 1
7cm Allen wrench x 1
B
D
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Berkeley CAPRI LTX-BBCHR-72815
- Page 1 17mm open-end wrench x 1 5cm Allen wrench x 1 6cm Allen wrench x 1 Thank you for purchasing our CAPRI barber chair by Berkeley. 7cm Allen wrench x 1 It is designed to maximize the quality and comfort of your work.
- Page 2 3. Remove the 4 screws from the seat cushion, align ASSEMBLE INSTRUCTIONS the holes with the seat frame (C), and then tighten the screws back. 1. Remove all screws from the backrest (A), and then insert backrest (A) into the seat frame (C). Align all the holes, and then tighten the screws back to their original holes as shown in the figure below.
Need help?
Do you have a question about the CAPRI LTX-BBCHR-72815 and is the answer not in the manual?
Questions and answers