Advertisement
WARNING
This product can expose you to chemicals including
LEAD/CADMIUM/DEHP, which is known to the State
of California to cause cancer and birth defects or
other reproductive harm. For more information go
to www.P65Warnings.ca.gov.
Please carefully read and save these instructions before attempting to assemble, maintain, install, or operate this product.
Observe all safety information to protect yourself and others. Failure to observe the instructions may result in property
damage and/or personal injury. Please keep instructions for future reference.
For warranty purchasses, please keep your dated proof of purchase. File or attach to the manual for safekeeping.
For Customer Service, Call 1-800-348-5004
or e-mail customerservice@focus-ontools.com
Auto-Darkening Welding Helmet
Model: 07664
*Actual product may vary slightly
07664
12/2017
Advertisement
Table of Contents
Summary of Contents for Speedway 07664
- Page 1 Auto-Darkening Welding Helmet Model: 07664 WARNING This product can expose you to chemicals including LEAD/CADMIUM/DEHP, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go *Actual product may vary slightly to www.P65Warnings.ca.gov.
-
Page 2: California Proposition 65
Important Operating Instructions CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry. This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm. Wear protective gear. WARNING: This product or its power cord may contain chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. -
Page 3: Safety Instructions
Important Operating Instructions Safety Instructions • Do not use the Welding Helmet if the lens is cracked, if the lens or sensors are dirty, or if the lens or front retaining frame is loose. • Keep work area clean. Cluttered areas invite injuries. •... - Page 4 Important Operating Instructions Safety Instructions • This helmet provides protection for intended purposes only. There are certain applications for which this helmet was designed. Do not modify this helmet and do not use this helmet for a purpose for which it was not intended. A.
-
Page 5: Before Welding
Important Operating Instructions Shade Guide Chart Welding Current (Ampere) Welding 30 40 60 80 100 125 150 175 200 225 250 275 300 350 400 450 Process Covered Electrodes MIG on Heavy Metals MIG on Light Alloys TIG on Metals & Alloys Arc-Air Gouging Plasma Jet Cutting Operating Instructions... -
Page 6: Adjusting Headband
Important Operating Instructions Shade Number and Grinding Mode Selection 1. Select the shade number you need (see Shade Guide Chart on the previous page) by turning the Shade Control Knob. Be sure that the shade number of the Welding Helmet is the correct shade number for your application. - Page 7 Important Operating Instructions Switch Sensitivity Adjustment Time Delay and Sensitivity Adjusts the amount of light needed to activate the lens to darken. At the moment the welding operation is started, the filter screen automatically changes from ANSI Z87.1-2003 clear to dark. Variable Shade 4/9-13 The operator can vary the amount of time it takes the filter to return to a clear state and the...
-
Page 8: Limited Manufacturer Warranty
Important Operating Instructions WARRANTY Limited Manufacturer Warranty FOT makes every effort to ensure that this product meets high quality and durability standards. FOT warrants to the original retail consumer a 1-year limited warranty from the date the product was purchased at retail and each product is free from defects in materials.
Need help?
Do you have a question about the 07664 and is the answer not in the manual?
Questions and answers