Honeywell ENVITEC OXIPEN Instructions For Use Manual

INSTRUCTIONS FOR USE
OXIPEN
®
PULSE OXIMETER
INSTRUCTIONS FOR USE
These instructions have been prepared
with great care – should you find details,
however, which are not concurrent with
the handling of this system, please
advise us promptly so that we may
eliminate any inconsistencies as
quickly as possible.
We reserve the right to make
changes stemming from further
development in relation to the information stated in these
instructions.
All trademarks cited and illustrated in the text are trademarks of
the current owners and are recognized as being protected.
Reproduction, translation and duplication in any form – even
abridged – require the written approval of the manufacturer.
This handbook is subject to the revision service of Honeywell
Healthcare Solutions GmbH.
LIST OF ILLUSTRATIONS
FIG. 1: FRONT, BACK, AND FRONT END VIEWS ...................... 4
FIG. 2: OXIPEN® DISPLAY ................................................... 4
FIG. 3: INSTRUMENT ERROR DISPLAY ................................. 5
FIG. 4: OPENING THE BATTERY COMPARTMENT LID ............ 6
FIG. 5: CONNECTING THE SENSOR ..................................... 6
FIG. 6: DISPLAY SIGNAL ACTIVATED/DEACTIVATED ............ 7
1 GENERAL INFORMATION ......................................................... 2
2 SAFETY INFORMATION ............................................................. 2
3 INTRODUCTION ........................................................................... 3
3.1 INTENDED USE .................................................... 3
3.2 GENERAL FUNCTIONAL PRINCIPLES
AND CONDITIONS ............................................... 3
3.3 ACCURACY, MALFUNCTIONS................................. 3
4 OPERATOR CONTROLS AND SYMBOLS ............................. 4
4.1 THE INSTRUMENT ............................................... 4
4.2 THE DISPLAY ....................................................... 4
4.3 OXIPEN® SYMBOLS .............................................. 4
5 INFORMATION MESSAGING AND SIGNALS ...................... 5
5.1 DISPLAY .............................................................. 5
5.2 SIGNAL QUALITY ................................................. 5
5.3 VARIABLE PULSE TONE ....................................... 5
5.4 SIGNALS ............................................................. 5
5.5 ERROR MESSAGES .............................................. 5
6 COMMISSIONING ....................................................................... 6
6.1 UNPACKING & CHECKING THE CONSIGNMENT ....... 6
6.2 TESTS ................................................................. 6
6.3 PARTS LIST.......................................................... 6
6.4 INSERTING THE BATTERIES .................................. 6
6.5 CONNECTING THE SENSORS ................................ 6
7 OPERATION ................................................................................... 6
7.1 SWITCHING THE INSTRUMENT ON AND OFF ......... 6
7.2 BACK LIGHTING ................................................... 6
7.3 SIGNAL MUTE SWITCHING ................................... 7
7.4 POWER SAVING SWITCH-OFF ............................... 7
8 ENVITEC BY HONEYWELL SPO
SENSORS & ACCESSORIES ...................................................... 7
8.1 SELECTION AND APPLICATION OF A SENSOR. ........ 7
8.2 OVERVIEW OF ENVITEC SENSORS AND CABLES ..... 7
9 FAILURE CORRECTION AND MAINTENANCE ................... 8
9.1 CLEANING, DISINFECTION OF THE INSTRUMENT
SURFACES .......................................................... 8
9.2 CLEANING, DISINFECTION OF THE SENSORS ......... 8
9.3 MAINTENANCE AND SERVICE ............................... 8
9.4 CALIBRATION ...................................................... 8
9.5 RETURNING THE OXIPEN®. .................................. 8
9.6 DISPOSAL OF THE PRODUCT ............................... 8
10 GUARANTEE .................................................................................. 9
11 TECHNICAL DATA ........................................................................ 9
11.1 SPECIFICATIONS ................................................. 9
Issue 3
058-07-21000085
2