Kobra VS Quick Start Manual

State modes
Sleep mode
Standard mode
without PC
connection
Default settings
User PIN:
Number of digits:
Failed attempts:
SO PIN:
Number of digits:
Failed attempts:
Administrator PIN:
Number of digits:
Failed attempts:
Time-Out:
Lock-Out:
Write protection:
Menu overview
Main button
Authenticate the user
Change the User PIN
Generate a new DEK
(Crypto Key)
Change the
Administrator PIN
User PIN
Commands
Commands 1,2,3,7,0 can be run without a PC connection.
Command Entry
Enter the await mode from any state by pressing the
„ " button. The main button will then light up white.
Enter the menu mode by briefly pressing the main button.
The main button will then light up
Command entry guide:
Step 1:
„Main button" + „Command digit" + „
Step 2:
blinks
Main button
blinks light
Main button
blinks
Main button
Await mode
Smartcard
Standard mode
with PC
connection
1-2-3-4
4 to 12
3
1-2-3-4-5-6-7-8-9-0
4 to 12
10
8-7-6-5-4-3-2-1
4 to 16
16
off (adjustable from 0 to 30 minutes)
off
off
Cancel
SO PIN
Commands
dark
green: Enter the User PIN and press „
blue: Enter the SO PIN and press „
purple: Enter the Administrator PIN and press „
Menu mode
Smartcard
After pressing
the main button
in await mode
Switch the write protection
on / off
Unlock the User PIN
Switching lockout mode
on / off
Configure time-out
Delete the smartcard table
Confirm
blue.
"
Authentication
mode
Smartcard
After inserting
the correct
smartcard
Administrator PIN
Commands
"
"
"