Page 2
10. Do not place the induction hob on a carpet or tablecloth (vinyl material) or any other items that are not heat resistant. 11. Do not put the paper between the pot and the heating surface and then heat. 台北市大同區承德路二段 96 號 Freser HoReCa International Corp. Tel: 02-2553-1555 / Fax: 02-2553-2742...
Page 3
The induction cooker will automatically shut down after continuous work for 2 hours when there’s no more operations to avoid the damage to the cookware due to improper use.If need to continue to work, just switch on again. 台北市大同區承德路二段 96 號 Freser HoReCa International Corp. Tel: 02-2553-1555 / Fax: 02-2553-2742...
Page 4
4.1.1 Setting program: after connecting to the power, in the standby state, press and hold the PROGRAM key for 5 seconds to enter the setting state, the indicator light of program 1 will flash, and you can press the 台北市大同區承德路二段 96 號 Freser HoReCa International Corp. Tel: 02-2553-1555 / Fax: 02-2553-2742...
Page 5
3 will be run directly. The power of step 3 is 0, this step is to stop heating for 5 minutes, and then run step 4. 台北市大同區承德路二段 96 號 Freser HoReCa International Corp. Tel: 02-2553-1555 / Fax: 02-2553-2742...
Page 6
Press the POWER key to adjust the power, and then press the decrease key to reduce the power from 3000W to 1500W. "1500" is displayed at the 台北市大同區承德路二段 96 號 Freser HoReCa International Corp. Tel: 02-2553-1555 / Fax: 02-2553-2742...
Page 7
2. If the error code is still displayed, test circuit which then it’s sensor NTC test circuit that measures the measures the temperature is faulty. temperature is faulty. Please send it for repair. 台北市大同區承德路二段 96 號 Freser HoReCa International Corp. Tel: 02-2553-1555 / Fax: 02-2553-2742...
Page 8
5). Use a vacuum cleaner to remove the dust accumulated on the suction and exhaust ports. 6). Do not let the water splash from the induction cooker (if water gets inside, it will cause malfunction). 台北市大同區承德路二段 96 號 Freser HoReCa International Corp. Tel: 02-2553-1555 / Fax: 02-2553-2742...
Need help?
Do you have a question about the D-350HP and is the answer not in the manual?
Questions and answers