Operation Modes; Steps After Using The Water Flosser - Oracura OC300 Manual

4 Operation Modes

You can select the desired operation mode by pressing the mode
button on your water flosser® handle.
Normal Mode: Higher water pressure ensures
advanced cleaning. Ideal for everyday use.
Soft Mode: The low water pressure allows for
gentle cleaning of the mouth. Ideal for first-time
users, children (age 8+ years), the elderly and
people with gum problems.
Pulse Mode: The flow of water comes out in
short bursts, which is ideal for cleaning &
massaging the gums.
Custom Mode: Long press the Mode Button for
5 secs to switch between 6 level of water
pressure settings, the indicator light will flash,
and water pressure will start from the lowest
pressure and increase gradually, after each
pressing. If you release the mode button, water
pressure will be selected.
Steps After Using The Water Flosser®
1] Open the water tank cap and
dispose off the water from the tank.
2] Press the On/ Off button to turn on
the water flosser® and drain out the
remaining water.
3] Pres the On/ Off button again to
turn Off the water flosser® and close
the water tank cap.
4] Wipe the water flosser® with a dry
cloth.
To prevent bacteria,
make sure there are no
water traces inside the
water tank. If you're
not going to use the
flosser for a long time,
be sure to wipe and
dry the same before
preserving it.
6