Jartoo JT-HTB002 Manual

PRODUCT DESCRIPTION

Package Contents

This product contains the following items:

• Heated Blanket x1
• 100W GaN Adapter x1
• Remote Control x1
• Remote Control Charging Cable x1
• Storage Bag x1
• User Manual x1
• Warranty Card x1
• Apalos FlexHT Heating Technology Introduction Card x1

Jartoo Heated Blanket Diagram

1. Adapter Connection Port
   (hidden behind zipper)
2. Power Button
3. Side A: Velvet Fabric
4. Side B: Velvet Fabric
5. Apalos FlexHT Heating Element

Remote Control Diagram

1. Power Switch
2. Indicator Light Switch
3. Temperature "+"
4. Temperature "-"
5. Timer "+"
6. Timer "-"

Remote Control Status Indications

1. Battery Indicator
2. Bluetooth Connection Icon
3. Temperature Level
4. Timer Countdown

INSTRUCTION FOR USE

Getting Started

1. Open the hidden zipper to locate the DC jack port of the heating blanket;
2. Plug the DC connector into the DC power jack;
3. Connect the adapter to a 100Vto 240V AC power source.

Safety Precautions

1. If the indicator light flashes purple after powering on, disconnect the power immediately due to a malfunction.
2. Keep the power cord away from children to prevent electric shock or injury.
3. Do not use damaged wires, which may cause overheating or fire.
4. Never try to plug in the product when it is damp or wet to avoid electrical short circuits.
5. Ensure the power plug is fully inserted into the outlet to prevent electric shock, short circuits, smoke, or fire.
6. If you notice any issues or malfunctions, stop using the product immediately and unplug it.
7. Unplug the power cord when not in use to prevent potential hazards from circuit aging, short circuits, or leakage in damp environments.

Pairing the Remote Control with the Heated Blanket

By default, the remote control has been paired with the heated blanket when manufactured.

To re-pair the remote control with the heated blanket, please follow these steps:

1. Connect the power supply and ensure the heated blanket is plugged in standby mode;
2. Press and hold the "+" and "-" temperature buttons on the remote control simultaneously for 5 seconds;
3. Wait for the heated blanket's indicator light to start flashing blue;
4. Press the button on the heated blanket;
5. The Bluetooth icon will appear on the remote control's screen, indicating successful pairing.
6. If the Bluetooth icon is not displayed, the pairing has failed. You can try pairing again or contact customer support at support@jartoo.com.

Power ON/OFF

Method 1: Using the Remote Control

Power On: Press the power button on the remote control. The remote will display "L1" and the indicator light on the heated blanket will turn blue.
Power Off: Press the power button on the remote control again. The indicator light will turn off.

Method 2: Using the Heated Blanket Button

Power On: Press the button on the heated blanket. The indicator light will turn blue.
Power Off: Press and hold the button on the heated blanket for 3 seconds. The indicator light will turn off.
Note: The remote control is in sleep mode by default. Press any button to wake it up before operating.

Temperature Regulation

Method 1: Adjust the temperature with the "+" and "-" buttons on the remote control;

Method 2: Adjust the temperature by pressing the button on the blanket.

Level 1 is 95°F (35°C),the remote control displays L1, and the indicator light is blue;
Level 2 is 102°F (39°C),the remote control displays L2, and the indicator light is green;
Level 3 is 110°F (43°C),the remote control displays L3, and the indicator light is purple;
Level 4 is 117°F(47°C),the remote control displays L4, and the indicator light is cyan;
Level 5 is 124°F (51°C), the remote control displays L5, and the indicator light is orange;
Level 6 is 131°F(55°C),the remote control displays L6, and the indicator light is red.
The temperature settings cycle through from Level 1 to Level 6 and back to Level 1.

Timing Adjustment

Use the "" and "" buttons on the remote control to set the timer.
This function helps you automatically control the operating time of the heated blanket. The blanket will automatically shut off when the set time is reached. You can set the timer for 2, 4, 6, 8, or 10 hours.

Turn ON/OFF Indicator Light

Turn Off: Press the button to turn off the indicator light on the blanket if it's on;
Turn On: Press the button to turn on the indicator light on the blanket if it's off.
This feature helps reduce the disturbance of lighting when you are resting.

Note:

1. The indicator light can only be turned on using the remote control when it is off.
2. Pressing the button on the blanket will briefly turn the light on during operation, but it will turn off again afterward.
3. Adjusting temperature or timer settings with the remote will not turn on the indicator light if it is off.

Memory Function

Our heated blanket retains your last set temperature level. Each time you turn it on again, it will return to the last used setting.
Example: If the blanket was on Level 3 when you turned it off, it will start on Level 3 when you turn it back on.
Note: The memory function will be reset if the power is interrupted.

Automatic Sleep Protection

1. The heated blanket will enter sleep mode after two hours of inactivity.
2. If the blanket detects use while in sleep mode, it will immediately exit sleep mode and resume normal operation.

Note:
This feature will not activate if a timer shutdown is set.

Washing Instructions

1. Disconnect power.
   
2. Unplug the adapter and place the blanket power cable into the storage bag and zip it up.
   
3. Wash using a standard machine wash, then hang to dry or use a dryer.
   

Storage Instructions

1. Turn off the power and let the heated blanket cool down before storing.
   
2. Fully charge the remote control to ensure it's ready for future use.
   
3. Place the blanket and it's accessories in the provided storage bag for safekeeping.
   
4. Suggestion: Fold the heated blanket and store it without placing heavy items on top.
   

SPECIFICATIONS

FAQ

Q: Static electricity can be felt during use?
A: Static electricity can build up in dry winter conditions. Using a fabric softener during washing can help reduce static.

Q: The heated blanket emit radiation?
A: The heated blanket has a power frequency of 50HZ. According to IEC62233 "House hold appliances and similar apparatus. Measurement methods for electromagnetic fields with regard to human exposure," it is safe when the radiation amount is lower than 100 r.m.s; the value of the heated blanket measured by the authoritative testing organization SGS is 1.09 r.m.s (including the self-contained radiation value in the air), which is far lower than the safety limit.

Q: Can it be dried by a dryer?
A: Yes. However, to extend its lifespan, the drying temperature is recommended to be lower than 149°F.

Q: Can the heated blanket be used with other heaters?
A: No. Using other heaters at the same time may cause overly high temperature and pose a risk of overheating.

If the above solutions do not resolve the issue, please contact our customer service at support@jartoo.com for further assistance and solutions.

PRECAUTIONS FOR USE

• Inspect the power cord and adapter before use. If damaged, do not use and contact custome support at support@jartoo.com.
• Use only the adapter provided with the heated blanket. Do not substitute with other adapters.
• Please cut off the power and unplug the adapter before washing.
• Keep the adapter away from water. Do not wash it.
• Ensure the blanket is completely dry before use for optimal performance.
• Do not use it together with other heating devices to avoid burns by overheating.
• Unplug when not in use to save energy.
• Machine washable, but do not dry cleaning.
• Replace the heated blanket every 5 to 6 years for best results.

Jartoo
www.jartoo.com
Email: support@jartoo.com
Manufacturer Information:
Shenzhen Umbra Technology Co., Ltd.
Room 702, Building 11, Tianan Yungu Industrial Park,
Longgang District, Shenzhen, China

US Importer: Arknology LLC
Address: 30 DONOVAN IRVINE, CA, USA
UK Importer: CET PRODUCT SERVICE LTD. (For authorities only)
Address: Beacon House Stokenchurch Business Park, Ibstone Rd,
Stokenchurch High Wycombe HP14 3FE, UK
Email: info@cetproduct.com
EC Importer: CET PRODUCT SERVICE SP. Z O.O.(For authorities only)
Address: Ul. Dluga 33 102 Zgierz 95 100, Poland
Email: info@cetproduct.com