Advertisement
Quick Links
9/30/24
August 2002
OPERATOR'S MANUAL
OPERATORʼS MANUAL
Adjust-A-Flange
Adjust-A-Flange
7514 Alabonson Rd.
Houston, Texas
77088
281-999-6900
281-999-6966 (fax)
51A Caldari Rd., #16
Concord, Ontario
L4K 4G3
905-760-7539
905-760-9277 (fax)
Unit F1 Halesfield 4
Telford, Shropshire, UK
TF7 4AP 011-44-1952-684862
011-44-1952-585671 (fax)
© 2024 Sumner Manufacturing Co., LLC. All rights reserved. */™ Trademark of Sumner Manufacturing Company, LLC.
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Southwire SUMNER Adjust-A-Flange
- Page 1 9/30/24 August 2002 OPERATOR’S MANUAL OPERATORʼS MANUAL Adjust-A-Flange Adjust-A-Flange 7514 Alabonson Rd. Houston, Texas 77088 281-999-6900 281-999-6966 (fax) 51A Caldari Rd., #16 Concord, Ontario L4K 4G3 905-760-7539 905-760-9277 (fax) Unit F1 Halesfield 4 Telford, Shropshire, UK TF7 4AP 011-44-1952-684862 011-44-1952-585671 (fax) ©...
- Page 2 OWNERʼS RESPONSIBILITIES Throughout this publication, the words WARNING, CAUTION and IMPORTANT will be used to alert the user to special in- structions concerning a particular operation that may be haz- ardous if performed incorrectly or carelessly. OBSERVE THEM CAREFULLY !! These “Safety Alerts”...
-
Page 3: Operator Safety Instructions
OPERATOR SAFETY INSTRUCTIONS Read and understand Operators Manual before using Adjust-A-Flange IMPORTANT Become familiar with the unitʼs operations, appli- cations and limitations. Always contact the fac- tory if in doubt. Be particularly aware of its specific hazards. Additional copies of this manual are available at no charge from Sumner Manufactur- ing Co. - Page 4 OPERATING INSTRUCTIONS 7. Place a level on top of the two Ad- 1. The Adjust-A-Flange is intended to be just-A-Flange nuts. It should indi- used with a Sumner Roust-A-Bout, cate level Fabmate or an overhead lifting de- 8. If the flange is not level, remove one vice.
- Page 5 1. Attach the Adjust-A-Flange to the Adjust-A-Fit ensuring the set screw on the Adjust-A-Fit engages the 5/16” (8 mm) hole and that the fin- gers of the Adjust-A-Fit sit firmly into the recess on the body of the Ad- just-A-Flange. 2.
- Page 6 Item Part No. Description 780543 780544 Body 780545 780546 Cone 780547 Acme Bolt 773600 Lock Washer 772150 Hex Nut, 9/16-18 775040 Bushing 771350 Shoulder Screw 1/2 x 1/2...
Need help?
Do you have a question about the SUMNER Adjust-A-Flange and is the answer not in the manual?
Questions and answers