Forest 5201002280 Manual

ain /
SNELSTART GIDS
FOREST WIFI DONGLE
ttle® motor
ct an
t and try
led turns
e to switch
Wi-Fi Dongle Quick Start Guide
Troubleshooting
1. I've successfully configured the Wi-Fi dongle, but the curtain /
master carrier doesn't move.
- Make sure the dongle is connected to Port 1 on the Shuttle
- Make sure the curtain track is already in working order, which means
the start and end position need to be set.
- Scan the QR code to see how to set or reset these positions.
2. What devices can I control using this Wi-Fi dongle
You can control the Forest Shuttle® S, M and L curtain track motors.
3. I don't see any lights on the dongle after plugging it in
- Make sure the Shuttle® motor is powered
- Make sure the Dongle is connected to Port 1 on the Shuttle®
- Press and hold the connect button for 6 seconds
*If everything as mentioned above is correct but the dongle doesn't light up, your Shuttle® motor
is not suitable for powering the Wi-Fi dongle without an external power supply. Connect an
external power supply (5V USB adapter with a Micro-USB cable) to the Micro-USB port and try
again.
4. The dongle won't connect to my Wi-Fi network
EN EN
NL NL