Download Print this page

Advertisement

Quick Links

ANBAUANLEITUNG
mounting instructions • instructions de montage • instrucciones de montaje • istruzioni di montaggio
KFT.02.643.65001/B
beinhaltet • contains • contient • contiene • contiene
KFT.02.643.30000/B
KFT.00.152.36000
HSK.00.745.10001/B
LOC.00.745.10200

Advertisement

loading
Need help?

Need help?

Do you have a question about the KFT.02.643.65001/B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SW-Motech KFT.02.643.65001/B

  • Page 1 ANBAUANLEITUNG mounting instructions • instructions de montage • instrucciones de montaje • istruzioni di montaggio KFT.02.643.65001/B beinhaltet • contains • contient • contiene • contiene KFT.02.643.30000/B KFT.00.152.36000 HSK.00.745.10001/B LOC.00.745.10200...
  • Page 2: Safety Warning Symbol

    ~ 0.75 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
  • Page 3 Do not use thread lock: Indicates that no liquid thread lock should be used at this point. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 4 M8 x 20; DIN 7991 Ø 15 / ø 8,4 / h 3 KFT.07.592.003.11 SC.ST.08.020.02.7991.088 DB.00.150.084.003.01 KFT.02.643.971.01.11 KFT.02.643.972.01.11 KFT.11.953.003.11 KFT.00.152.SV.8 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 5 18 Nm Do not tighten the screws (3) and (8) yet. × × × 23 Nm × × × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 6 MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS!  NOTE: The SW-MOTECH anti-theft protection devices are available separately; × mount the anti-theft protection devices on both sides at the indicated position. a Connect the side carriers (10/11) on both sides with the quick-release fasteners (13) to the fastening tabs (1), (2) and (7).
  • Page 7 Association for Technical Inspection) regulations. After assembly, parts that are subject to registration should be entered into the vehicle documents by your test center. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 8 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
  • Page 9 Use thread locker: Indicates that a thread must be coated with liquid thread locker. H (HIGH): high strength; M (MEDIUM): medium strength; L (LOW): low strength. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 10 M6 x 12; ISO 7380 M6 x 25; DIN 7991 M6; DIN 6927 HSK.00.745.025.35GR SC.ST.06.012.02.7380.109 GPT.00.152.010.35 SC.ST.06.025.02.7991.088 MU.ST.06.02.6927.08 KFT.00.152.026.02 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 11 Tighten the screws as specified in the mounting instructions. 9 Nm Then insert the rubber dampeners (6) into the indicated openings. × × 9 Nm × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 12 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 13 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
  • Page 14 ASSEMBLY section, the vehicle manufacturer's our online shop: specifications must be observed and applied. www.sw-motech.com The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 15 PARTS LIST · READ AND KEEP MOUNTING INSTRUCTIONS! HSK.00.745.500.04 TRX.T20 ALK.00.165.A63 ALK.00.165.562.01 QLS.00.095.520.01 SV.ST.095.007.LK.02 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 16 1.1 - Press the DUSC release button (*) and pull the lid latch buckle into the open position. 1.2 - Remove the latch buckle from the corresponding bracket and open the lid. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 17  NOTE: Ensure that the locking mechanism is in working order! ×  NOTE: NEVER lubricate the lock cylinder with oil! Only use graphite powder! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 18 Secure the lock (4) on the inside with the safety clip  NOTE: NEVER lubricate the lock cylinder with oil! Only use graphite powder! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 19 4.4 - Then the anti-theft protection device (5) must be secured against unscrewing.  NOTE: NEVER lubricate the lock cylinder with oil! Only use graphite powder! The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
  • Page 20 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.