Advertisement
Dellonda Electric Tiller/Cultivator
Model No. DG217.V2
Thank you for purchasing a Dellonda product. Manufactured to a high standard, this product will,
if used according to these instructions, and properly maintained, give you years of trouble free performance.
DG217.V2 Issue:1 07/01/25
www.dellonda.co.uk
Advertisement
Table of Contents
Related Manuals for dellonda DG217.V2
Summary of Contents for dellonda DG217.V2
- Page 1 Dellonda Electric Tiller/Cultivator Model No. DG217.V2 Thank you for purchasing a Dellonda product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. DG217.V2 Issue:1 07/01/25...
-
Page 2: Electrical Safety
• Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs and all electrical connections for wear and damage. Dellonda recommend that an RCD (Residual Current Device) is used with all electrical products. You may obtain an RCD by contacting your local domestic stockist. - Page 3 • Use machines and equipment in accordance with manufacturers’ instructions with regard to site conditions, gradient, terrain and vegetation type. • Train operatives to identify changeable site-specific factors, such as weather and surface conditions, and empower them to adapt working practices as appropriate. www.dellonda.co.uk...
-
Page 4: Specification
• 7. WARNING: If any parts are damaged or missing DO NOT operate this product until the parts are replaced. Failure to heed this warning could result in serious personal injury. Contact Dellonda Service Centre. • 8. WARNING: DO NOT attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. - Page 5 Be careful not to let the tines touch the ground while moving the tiller/cultivator. The tines as well as the unit itself may be damaged even if the motor is switched off. Clearing foreign objects: During operation a stone or root could become lodged in the tines, or tall grass or weeds may become wrapped around the tine shaft. www.dellonda.co.uk...
-
Page 6: Maintenance
• Drain screw plugs are located on the right side of transmission housing. Lay the tiller/cultivator on its left side and clean the transmission of dirt and debris prior to removing the drain screw plugs. If necessary, remove tine assemblies to have better access to the drain screw plug. Use a 5mm hex key to unscrew the plugs. www.dellonda.co.uk... -
Page 7: Troubleshooting
It is our policy to continually improve products and we reserve the right to alter data, specifications and parts without prior notice. No liability is accepted for incorrect use of this product. Guarantee is 12 months from purchase date, proof of which is required for any claim. Dellonda Limited Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757575 support@dellonda.co.uk...
Need help?
Do you have a question about the DG217.V2 and is the answer not in the manual?
Questions and answers