HOW TO SET A THREE-HANDED WATCH WITH DATE FUNTION (VJ52) DATE SETTING 1) Pull out the crown to position 2. 2) Turn the crown counterclockwise unit the previous date appears. Note: Do not set the date between 9:00P.M. to 3:00 A.M. Otherwise the date may not change properly.
Page 3
HOW TO SET A THREE-HAND WATCH WITH CHRONO- GRAPH (VD53, VD54, VD57, VD67) TIME SETTING (VD54) 1) Pull out the crown so as to stop the second hand at the 12 o’clock position. 2) Turn the crown to set the time. 3) Push the crown back in to position 1.
Page 4
3) Press button A or B to reset the stopwatch hands to the “0” position. VD53/ VD54: Press button A to move the hands counterclockwise. Press button B to move the hands clockwise. VD57: Press button A to set the stopwatch 1/10 second hand. Press button B to set the stopwatch second and minute hands.
Page 5
VD57 STOPWATCH 1/10 MINUTE HAND SECOND HAND BUTTON A HOUR HAND DATE STOPWATCH MINUTE HAND 1. 2. 3. SECOND HAND BUTTON B STOPWATCH SECOND HAND VD67 MINUTE HAND SECOND HAND BUTTON A HOUR HAND STOPWATCH HOUR HAND DATE STOPWATCH 1/5 SECOND 1.
Page 6
HOW TO SET A THREE-HAND WATCH WITH CHRONO- GRAPH (ISA 8172/220) TIME/ DAY SETTING 1) Pull out the crown to position 3. 2) Turn the crown advance hour and minute hands. e hand showing the days of the week will also move with the hour and minute hands. Advance the hour and minute hands until the desired days of the week appear.
Page 7
STOPWATCH HAND POSITION ADJUSTMENT 1) Pull out the crown to position 2. 2) Press button B to set the stopwatch minute hand. 3) Press button A to set the stopwatch 1/5 second hand. 4) Push the crown back in to position 1. STOPWATCH MINUTE HAND SECOND HAND BUTTON A...
HOW TO SET A THREE-HAND WATCH WITH CHRONO- GRAPH (RONDA 5030.D) TIME/ DATE SETTING 1) Pull out the crown to position 2. 2) Turn the crown unit the previous day’s date appears. Note: Do not set the date between 9:00P.M. to 3:00 A.M. Otherwise the date may not change properly.
Page 9
Note: e hands move quickly if the respective buttons are held down. HOUR HAND MINUTE HAND BUTTON A STOPWATCH MINUTE HAND SECOND HAND STOPWATCH SECOND HAND 1. 2. 3. BUTTON B DATE STOPWATCH HOUR HAND...
Page 10
HOW TO SET A THREE-HANDED WATCH WITH DAY AND DATE HANDS (VD75) TIME/ DAY SETTING 1) Pull out the crown to position 3. 2) Turn the crown advance hour and minute hands. e hand showing the days of the week will also move with the hour and minute hands. Advance the hour and minute hands until the desired days of the week appear.
Page 11
HOW TO SET A TWO-HANDED WATCH WITH 24-HOUR AND SECOND HANDS (VD77) TIME SETTING 1) Pull out the crown to position 2. 2) Turn the crown to set the time. 3) Push the crown back in to position 1. 24-HOUR HAND SETTING e 24-hour hand moves correspondingly with the hour and minute hands.
Page 12
HOW TO SET A TWO-HANDED WATCH WITH SECOND HANDS (VD78) TIME SETTING 1) Pull out the crown to position 2. 2) Turn the crown to set the time. 3) Push the crown back in to position 1. HOUR HAND MINUTE HAND 1.
Page 13
HOW TO SET A TWO-HANDED WATCH WITH DAY AND DATE HANDS (VD79) TIME/ DAY SETTING 1) Pull out the crown to position 3. 2) Turn the crown advance hour and minute hands. e hand showing the days of the week will also move with the hour and minute hands. Advance the hour and minute hands until the desired days of the week appear.
Page 14
HOW TO SET AN AUTOMATIC MECHANICAL WATCH (Y675/ Y676/ NH38) AUTOMATIC MECHANICAL WATCH SETTING 1) If the watch is worn on the wrist, the mainspring will be wound automatically through normal wrist movement. 2) To start the watch after it stops completely, wind it up by swinging it from side to side until the second hand starts moving.
Page 15
to any time outside this period, then set the date and day. 3) Pull out the crown to position 3. Advance the hour and minute hands until the desired date appears. e time is now set for the A.M. period. 4) Push the crown back in position 1.
Page 16
Y676 HOUR HAND MINUTE HAND DATE SECOND HAND 1. 2. 3. NH38 HOUR HAND MINUTE HAND 1. 2. SECOND HAND...
TO PRESERVE THE QUALITY OF YOUR WATCH PRECAUTIONS ON WEARING YOUR WATCH 1) In case you tumble, fall or bump into others with the watch worn on your wrist, you may be injured by the reason of the fact that you wear the watch.
Page 18
<Leather band> When removing moisture from a leather band, do not rub the band with the cloth as this may discolor it or reduce its gloss. Be sure to blot up the moisture using a soft dry cloth. <Metal band> Clean the watch band with a soft toothbrush dipped in water or soapy water, and be sure to blot up the moisture using a soft dry cloth.
e possible causes of the rash are as follows: a. Allergy to metals or leathers b. Rust, dust or perspiration on the watch or band 4) If you develop any skin reactions, take o the watch and consult a doctor immediately. WATER RESISTANCE Check the dial or the back of your watch case for the water resistant quality, and then see the table below.
Page 20
4) NEVER WEAR your watch into a hot tub or sauna. Extreme heat and pressure may cause your watch to lose its water resistance. 1) After you use a 5, 10, 15, or 20 ATM water-resistant watch in a bathing place, remove salt, etc. as soon as possible. If not, the watch may be rusted.
REMARKS ON THE BATTERY BATTERY LIFE When a new battery is installed, this watch operates for approximately two years. However, if the functions such as a stopwatch are used, the battery life may be less than the speci ed period. MONITOR BATTERY e battery in your watch may run down in less than the speci ed period after the date of purchase, as it is a monitor battery inserted at the factory...
Need help?
Do you have a question about the VJ52 and is the answer not in the manual?
Questions and answers