Download Print this page

Hills 80154713 Product Manual

Indoor & outdoor portable airer

Advertisement

Quick Links

Indoor & Outdoor
Portable Airer
Product Manual
80154713
Ames Australasia Pty Ltd
ABN 89 169 427 061
Level 1, 660 Doncaster Road,
Doncaster Vic 3108 Australia
BQ01288-1

Advertisement

loading
Need help?

Need help?

Do you have a question about the 80154713 and is the answer not in the manual?

Questions and answers

Summary of Contents for Hills 80154713

  • Page 1 Indoor & Outdoor Portable Airer Product Manual 80154713 Ames Australasia Pty Ltd ABN 89 169 427 061 Level 1, 660 Doncaster Road, Doncaster Vic 3108 Australia BQ01288-1...
  • Page 2 Congratulations on the purchase of your new Hills Indoor & Outdoor Portable Airer which will period, AMES Australasia Pty Ltd will, at its option, replace the product, supply replacement In the event of a defect covered by this warranty, you should contact the Hills Customer Service WARNING •...
  • Page 3: Installation

    Installation Assembling the Frame and Legs Prepare the Centre Module NOTE: Once the hinge has clicked into place it cannot be returned to its original Fig. 1 Lift until a...
  • Page 4 Attach the Legs Moving your Airer around the home NOTE: For comfortable assembly, raise the unit by pressing the lock button and lifting Lift the airer roughly 20cm upwards from the end without wheels by gripping the Centre in Fig. 2 Fig.
  • Page 5 Raising & Lowering the Wings of your Portable Airer WARNING: • • To raise and lock the wings, grip the frame in the middle and lift upwards until you hear To lower the wings to the flat position, grip the frame in the middle and raise slightly until Fig.
  • Page 6 Attach the Leg Braces Adjusting the Height of your Portable Airer Place Part C over the Legs and align the bolt holes as shown in Fig. 4. WARNING: • • Refer to Fig. 11. Fig. 4 Fig. 11 Bolt B Slowly slide the airer to the desired...
  • Page 7 Assemble the Wings Fig. 5. Fig. 10 Fig. 10 Fig. 5 Fig 6 Fig. 6 13 9...
  • Page 8 Attach the Line Fig 7. NOTE: Insert one end of the PVC Line through the plastic bush and tie a simple knot to Fig. 8. Fig. 7 Fig. 8 Insert line here Insert line here Refer to Fig. 9. Fig. 9 Line starts here Line starts...