Summary of Contents for Beijer Electronics GT-227F
Page 1
User Manual GT-227F Digital Output Module 16 ch, 24 VDC, 2 A, sink, cage clamp, 18 pt removable terminal Doc ID: 76516 2025-02-20...
Page 2
The information in this document is subject to change without notice and is provided as available at the time of printing. Beijer Electronics AB reserves the right to change any information without updating this publication. Beijer Electronics AB assumes no responsibility for any errors that may appear in this document.
9.2. Mount Module to DIN Rail ..............16 9.3. Mount Removable Terminal Block ............. 18 9.4. Connect Cables to Removable Terminal Block ..........19 9.5. Wiring Guide ..................19 9.6. Field Power and Data Pins ..............21 Beijer Electronics, Doc ID: 76516 2025-02...
About This Manual 1. About This Manual This manual contains information on the software and hardware features of the Beijer Electronics GT-227F Digital Output Module. It provides in-depth specifications, guidance on installation, setup, and usage of the product. 1.1. Symbols Used in This Manual This publication includes Warning, Caution, Note and Important icons where appropriate, to point out safety-related, or other important information.
Before using this product, please read this manual and other relevant manuals carefully. Pay full attention to safety instructions! In no event will Beijer Electronics be responsible or liable for damages resulting from the use of this product. The images, examples and diagrams in this manual are included for illustrative purposes. Because of the many variables and requirements associated with any particular installation, Beijer Electronics cannot take responsibility or liability for actual use based on the examples and diagrams.
IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/Serial etc. • Expansion Module - Expansion module types: Digital IO, Analog IO, and Special modules. • Messaging - The system uses two types of messaging: Service messaging and IO messaging. Beijer Electronics, Doc ID: 76516 2025-02...
Valid parameter data depends on the modules in use. For example, analog modules have settings of either 0-20 mA or 4-20 mA, and temperature modules have settings such as PT100, PT200, and PT500. The documentation for each module provides a description of the parameter data. 2025-02 Beijer Electronics, Doc ID: 76516...
Supply voltage: 24 VDC nominal Voltage range: 15-30 VDC Power dissipation: 30 mA @ 24 VDC Single wiring I/O cable max. 0.75 mm² (AWG 18) Weight 48 g Module size 12 mm x 109 mm x 70 mm Beijer Electronics, Doc ID: 76516 2025-02...
• GT-9XXX: Max. 2.0 A per channel / Max. 10 A per unit • GL-9XXX: Max. 2.0 A per channel / Max. 8 A per unit Protection None Common type 16 points / 2 COM 2025-02 Beijer Electronics, Doc ID: 76516...
Green OUTPUT channel 11 Green OUTPUT channel 12 Green OUTPUT channel 13 Green OUTPUT channel 14 Green OUTPUT channel 15 Green Channel Status Status Indicates Not signal Normal operation On signal Green Normal operation 2025-02 Beijer Electronics, Doc ID: 76516...
7. Mapping Data Into the Image Value Output Image Value Bit no. Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Byte 0 Byte 1 Output Module Data Beijer Electronics, Doc ID: 76516 2025-02...
0: Fault value, 1: Hold last state Byte 1 Fault action (ch8-ch15) 0: Fault value, 1: Hold last state Byte 2 Fault value (ch0-ch7) 0: Off, 1: On Byte 3 Fault value (ch8-ch15) 0: Off, 1: On 2025-02 Beijer Electronics, Doc ID: 76516...
Installation position is valid vertical and horizontal. The drawings are illustrative and may be out of proportion. CAUTION NOT following the space requirements may result in damaging the product. Beijer Electronics, Doc ID: 76516 2025-02...
• GT-5XXX • GT-7XXX GN-9XXX modules have three locking levers, one at the bottom and two on the side. For mounting instructions, refer to Mount GN-9XXX Module. Mount to DIN rail Dismount from DIN rail 2025-02 Beijer Electronics, Doc ID: 76516...
Page 17
9.2.2. Mount GN-9XXX Module To mount or dismount a network adapter or programmable IO module with the product name GN-9XXX, for example GN-9251 or GN-9371, see the following instructions: Mount to DIN rail Dismount from DIN rail Beijer Electronics, Doc ID: 76516 2025-02...
Hardware Setup 9.3. Mount Removable Terminal Block To mount or dismount a removable terminal block (RTB), see the instructions below. Mount a removable terminal block Dismount a removable terminal block 2025-02 Beijer Electronics, Doc ID: 76516...
Observe the maximum output current of the I/O module. Parts may be damaged! Do not connect the input and GND pins without any load. Parts may be damaged! If you are using current above 1A, do not use next one channel. Beijer Electronics, Doc ID: 76516 2025-02...
Token output port of processor module Serial output Transmitter output port of processor module Serial input Receiver input port of processor module Reserved Reserved for bypass token Field GND Field ground Field VCC Field supply voltage (24 VDC) Beijer Electronics, Doc ID: 76516 2025-02...
Need help?
Do you have a question about the GT-227F and is the answer not in the manual?
Questions and answers