Advertisement
Hand mixer ib
14/10/02
fl
Features
⁄ Body
¤ Speed control slider
‹ Release button
› Mounting holes
fi Beaters
fl Dough hooks
‡ Heel rest and cord storage
· Rating plate
Assembly
WARNING: Make sure that the mixer is
switched off and unplugged.
1 Choose beaters or dough hooks.
• Use beaters for mixing, beating, whipping
and creaming liquids and mixtures.
• Use dough hooks for mixing and
kneading dough.
2 Insert the stem of beater or dough hook
into one of the mounting holes in the
motor unit.
• The dough hook with the grey plastic part
should go into the hole marked by the
arrow.
3 Push and turn the beater or dough hook
until it locks into place.
4 Repeat for the other beater or hook.
5 To remove, press the release button.
11:38 AM
Page 5
¤
‹
⁄
fi
‹
¤
‡
Using
1 Switch on by sliding the speed slider to
one of the positions 1 (lowest speed) to 4
(highest speed).
• It is recommended to start at a low
speed, then change to a higher speed as
required.
2 Switch off by returning the slider to 0.
IMPORTANT: Do not operate the mixer
continuously for more than 10 minutes
(with beaters) or 2 minutes (with dough
hooks). After using for these lengths of
time, let it cool down for 10 minutes
before using again.
• When working with liquids, use a low
speed in order to avoid splashing onto
the mixer and firmly hold the liquid
container.
3
›
Advertisement
